Skip to Content
Last modified by Erik Bakker on 2025/04/18 13:54
From version 10.1
edited by eMagiz
on 2022/10/19 08:44
Change comment: There is no comment for this version
To version 42.1
edited by eMagiz
on 2023/01/26 08:57
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -On-premises deployment new runtime architecture
1 +On-premise Install Guide
Content
... ... @@ -1,11 +1,8 @@
1 1  {{container}}{{container layoutStyle="columns"}}(((
2 2  In this microlearning, we will focus on how the installation requirements for on-premises deployments of eMagiz runtimes that are part of the new runtime architecture. The new runtime architecture uses a containerized approach to deploy runtimes.
3 -
3 +
4 4  Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
5 5  
6 -* Last update: June 24th 2021
7 -* Required reading time: 10 minutes
8 -
9 9  == 1. Prerequisites ==
10 10  
11 11  * Advanced knowledge of the eMagiz platform
... ... @@ -12,37 +12,142 @@
12 12  * Good understanding of eMagiz runtimes in general
13 13  
14 14  == 2. Key concepts ==
15 -In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized envirionments
12 +In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
16 16  
14 +In the below section the specific operating systems and versions are discussed in a sense that the prerequisite installations are described. Once the right installation is done, refer to section 3.7 for the installation of the eMagiz agent that manages the interaction with the eMagiz platform. That agent will download the created docker images that will be deployed in the Docker environment.
15 +
17 17  == 3. On-premises deployments ==
18 18  
19 -===3.1 Installation requirements===
20 -Below the list of requirements for an on-premises deployment
18 +===3.1 General requirements===
19 +
20 +These are the general requirements to allow the installation of the eMagiz Docker agent:
21 +* Ensure access to the following URLs is enabled
22 + ** registry.emagiz.com:8443
23 + ** controlplane.emagiz.com:8000
24 + ** Preferably the entry should be *.emagiz.com
21 21  
22 -* Windows Server or Linux Server
23 -* Installed Docker software - latest version
24 -* Optional: Install Docker Desktop for Windows
25 - ** See also [[Install guide Docker>>https://docs.docker.com/desktop/install/windows-install/]]
26 -* Docker software installed requires use of the LinuxEngine
27 - ** Use command line option to switch to the option"C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
28 -* Server connected to the internet whereby the firewall doesn't prevent data traffic going outwards to the Internet
29 - ** In case there are outgoing firewall rules, the following URLs need to be made available
30 - *** https://testing.emagiz.com
31 - *** https://registry.emagiz.com
32 -* Sufficient resources in line with the requirements of the eMagiz runtimes. See this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-determining-needed-memory.WebHome||target="blank"]]
33 33  
34 -=== 3.2 Installation agent ===
35 -
36 -eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal or is available upon request. Once that agent is installed, the image that is generated for every eMagiz release can be downloaded and installed in the Docker instance.
37 -
38 -=== 3.3 Cloud architecture for API Gateway ===
39 -
40 -[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-install-runtime-images.png]]
27 +===3.2 Installation requirements Linux===
41 41  
29 +* Whenever Linux is selected as operating system, the latest version of Ubuntu will work
30 +* Install latest version of the Docker engine - see for instance {{code}}https://docs.docker.com/engine/install/ubuntu/{{/code}}
31 +* Go to the next section around installing the eMagiz agent
32 +
33 +===3.3 Installation requirements Windows Server 2022===
34 +
35 +These are the requirements to allow the installation of the eMagiz Docker agent:
36 +* Install latest version of Docker Desktop from {{code}}https://www.docker.com/products/docker-desktop/{{/code}}
37 +* Validate if WSL 2.0 is properly installed
38 +* Go to the next section around installing the eMagiz Docker agent
39 +
40 +Step 1: Install linux distribution
41 +{{code language="cmd"}}
42 + wsl --install -d Ubuntu
43 +{{//code}}
44 +
45 + #Install docker
46 +sudo apt-get update
47 +sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
48 +. /etc/os-release
49 +curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
50 +echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
51 +sudo apt update
52 +sudo apt install docker-ce docker-ce-cli containerd.io
53 +
54 +#Install Java
55 +wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
56 +echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
57 +sudo apt update # update if you haven't already
58 +sudo apt install temurin-8-jdk
59 +
60 +#Autostart Dockerd with wsl
61 +
62 +nano .bashrc
63 +
64 + DOCKER_DISTRO="Ubuntu"
65 + DOCKER_LOG_DIR=$HOME/docker_logs
66 + mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
67 + /mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
68 +
69 +#Do not ask password dockerd
70 +sudo visudo
71 +
72 + %docker ALL=(ALL) NOPASSWD: /usr/bin/dockerd
73 +
74 +#Set WSL config for memory
75 +USERDIR/.wslconfig
76 + # Settings apply across all Linux distros running on WSL 2
77 + [wsl2]
78 +
79 + # Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
80 + memory=16GB
81 +
82 + # Sets the VM to use two virtual processors
83 + processors=2
84 +
85 +(Exit WSL: wsl --shutdown)
86 + {{/code}}
87 +
88 +===3.4 Installation requirements Windows Server 2019 version >1806===
89 +
90 +These are the requirements to allow the installation of the eMagiz Docker agent:
91 +* Install latest version of Docker Desktop from https://www.docker.com/products/docker-desktop/
92 +* Validate if WSL 2.0 is properly installed
93 +* Go to the next section around installing the eMagiz Docker agent
94 +
95 +===3.5 Installation requirements Windows Server 2019 version 1806===
96 +
97 +These are the requirements to allow the installation of the eMagiz Docker agent:
98 +* Enable Hyper-V in Windows Server
99 + ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
100 + ** Restart windows
101 +* Cross check is WSL 2.0 is installed
102 + ** Use this command to get WSL 2.0: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
103 +* Install Docker Desktop on the Windows Server
104 + ** Please refer to this link: https://www.docker.com/products/docker-desktop/
105 + ** Restart windows
106 +* Update Docker Desktop configuration
107 + ** Go to settings, and enable ‘Expose daemon on tcp://localhost:2375’ without TLS
108 + ** Restart Docker
109 +* Open Powershell as Administrator
110 + ** Execute "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
111 + ** Execute Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
112 + ** Execute curl.exe -L -o ubuntu-2004.appx https://aka.ms/wslubuntu2004
113 + ** Execute Add-AppxPackage .\ubuntu-2004.appx
114 + *** If errors occur, please consult https://learn.microsoft.com/en-us/windows/wsl/install-on-server. Rename the file to a zip, expand it, and add it to the path variable.
115 +* Ubuntu should now be a runnable program (press windows key, type ubuntu)
116 +* Open the ubuntu terminal, and finish the installation.
117 + ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
118 +* Go to the next section around installing the eMagiz Docker agent
119 +
120 +===3.6 Installation requirements Windows Server 2012 R2 ===
121 +
122 +These are the requirements to allow the installation of the eMagiz Docker agent:
123 +* Install & enable Hyper-V in Windows Server
124 + ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
125 + ** Restart windows
126 +* Download a ubuntu server 18.04 (https://releases.ubuntu.com/18.04/ubuntu-18.04.6-live-server-amd64.iso )
127 +* Create a VM in HyperV.
128 + ** For this, choose Generation 1, the amount of memory you want to assign to ubuntu and thus to the containers. Please consider the overhead for memory as well (such as OS).
129 + ** Configure a virtual switch.
130 + ** Add a virtual Hard Disk with proper sizing (e.g. 30 GB)
131 + ** Install an operating system from bootable CD/DVD, ISO file
132 +* Install ubuntu downloaded previously on the VM
133 +* Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
134 +* Go to the next section around installing the eMagiz agent
135 +
136 +=== 3.7 eMagiz Docker agent installation ===
137 +
138 +eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal under Deploy Architecture. At the runtime connector, there is a right click option called Deploy Agent. That presents either the command or the location where that agent is installed.
139 +
140 +[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-installguide-deployagent.png]]
141 +
142 +After installing the agent, you can use the Docker cheat sheet below to see if the docker containers are running and/or images are available.
143 +
42 42  == 4. Assignment ==
43 43  
44 44  Check out the cheatcheet for Docker command line:
45 -
147 +
46 46  [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
47 47  
48 48  == 5. Key takeaways ==
... ... @@ -49,7 +49,7 @@
49 49  
50 50  * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
51 51  * eMagiz has a specific agent that manages the download of that image to the on-premises server
52 -* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
154 +* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
53 53  
54 54  
55 55