Skip to Content
Last modified by Erik Bakker on 2026/01/30 10:56
From version 142.1
edited by Erik Bakker
on 2026/01/23 12:50
Change comment: There is no comment for this version
To version 20.1
edited by eMagiz
on 2022/11/11 09:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Install Docker for Windows
1 +On-premises deployment new runtime architecture
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.ebakker
1 +XWiki.eMagiz
Content
... ... @@ -1,5 +1,5 @@
1 1  {{container}}{{container layoutStyle="columns"}}(((
2 -In eMagiz's current runtime architecture, Docker technology is utilized to deploy runtimes efficiently. eMagiz provides specific runtime images that can be deployed within dockerized environments. This section outlines the steps needed to prepare a Windows server for the installation of the eMagiz Deploy Agent, which is responsible for downloading these images from the eMagiz infrastructure.
2 +In this microlearning, we will focus on how the installation requirements for on-premises deployments of eMagiz runtimes that are part of the new runtime architecture. The new runtime architecture uses a containerized approach to deploy runtimes.
3 3  
4 4  Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
5 5  
... ... @@ -9,168 +9,98 @@
9 9  * Good understanding of eMagiz runtimes in general
10 10  
11 11  == 2. Key concepts ==
12 -In the current runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
13 -
14 -In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
15 -
12 +In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized envirionments
13 +
16 16  == 3. On-premises deployments ==
15 +
16 +===3.1 Installation requirements Linux===
17 17  
18 -===3.1 General requirements===
18 +These are the requirements to allow the installation of the eMagiz Docker agent:
19 +* Ensure access to the following URLs is enabled
20 + ** registry.emagiz.com
21 + ** testing.emagiz.com
22 + ** Preferably the entry should be *.emagiz.com
23 +* Install latest version of Docker
19 19  
20 -{{info}}It is advised to use Docker version 24.0.7 as this is the version being used in the latest eMagiz cloud template. We advise aligning the on-premise Docker version and updating it according to the release notes of the [[Cloud templates>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]].
21 -{{/info}}
25 +===3.2 Installation requirements Windows Server 2022===
22 22  
23 -{{info}}
24 -* Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
25 - ** registry.emagiz.com:443
26 - ** controlplane.emagiz.com:443
27 - ** controlplane-agent.emagiz.com:443
28 - ** controltower.emagiz.com:443
29 - ** controltower.kpn-dsh.com:443
30 - ** controlbus.emagiz.com:443
27 +These are the requirements to allow the installation of the eMagiz Docker agent:
28 +* Ensure access to the following URLs is enabled
29 + ** registry.emagiz.com
30 + ** testing.emagiz.com
31 31   ** Preferably the entry should be *.emagiz.com
32 - ** Preferably the entry should be *.kpn-dsh.com{{/info}}
32 +* Install latest version of Docker
33 +* Validate if WSL 2.0 is properly installed
34 +
35 +===3.3 Installation requirements Windows Server 2019 version 1806===
33 33  
34 -{{warning}}
35 -* When using **IP Whitelisting**, the following configuration is needed to communicate to your JMS.
36 - ** 35.158.46.28:443
37 - ** 3.74.190.88:443
38 - ** 35.158.46.28:8443
39 - ** 3.74.190.88:8443
40 - ** 35.158.46.28:8444
41 - ** 3.74.190.88:8444
42 - ** 3.74.209.20:443
43 - ** 3.76.127.155:443
44 - ** 3.74.209.20:8443
45 - ** 3.76.127.155:8443
46 - ** 3.74.209.20:8444
47 - ** 3.76.127.155:8444
48 - ** 18.199.123.240
49 - ** 18.184.211.189
50 - ** 3.123.136.31{{/warning}}
51 -
52 -
53 -
54 -===3.2 Installation Windows===
55 -When Windows is selected as the operating system, you need Windows Server 2022. Older Windows servers are **not** supported.
56 -
57 -==== 3.2.1 Docker Installation ====
58 -To install Docker on your machine, execute the following commands in PowerShell with administrative rights:
59 -
60 -{{code language="cmd"}}
61 -Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Install-update-docker/install-update-docker.ps1" -o install-update-docker-ce.ps1
62 -.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
63 -{{/code}}
64 -
65 -==== 3.2.2 Customization ====
66 -
67 -After installing Docker, you can stick with the standard configuration or adjust specific settings. Settings that can be of particular interest include the one that defines the IP address range your Docker installation will use to run containers, and the one that defines where to store data (i.e., containers and images). To check the full list of compatible configuration options for Windows, you can check: [[Configure Docker in Windows>>https://learn.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon||target="blank"]].
68 -
69 -{{warning}}Be aware that the customization will only take effect once you have restarted the machine.{{/warning}}
70 -
71 -===== 3.2.2.1 IP address range =====
37 +These are the requirements to allow the installation of the eMagiz Docker agent:
38 +* Ensure access to the following URLs is enabled
39 + ** registry.emagiz.com
40 + ** testing.emagiz.com
41 + ** Preferably the entry should be *.emagiz.com
42 +* Enable Hyper-V in Windows Server
43 + ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
44 + ** Restart windows
45 +* Install Docker Desktop on the Windows Server
46 + ** Please refer to this link: https://www.docker.com/products/docker-desktop/
47 + ** Restart windows
48 +* Update Docker desktop configuration
49 + ** Go to settings, and enable ‘Expose daemon on tcp://localhost:2375’ without TLS
50 + ** Restart Docker
51 +* Open Powershell as Administrator
52 + ** Execute "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
53 + ** Execute Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
54 + ** Execute curl.exe -L -o ubuntu-2004.appx https://aka.ms/wslubuntu2004
55 + ** Execute Add-AppxPackage .\ubuntu-2004.appx
56 + *** If errors occur, please consult https://learn.microsoft.com/en-us/windows/wsl/install-on-server. Rename the file to a zip, expand it, and add it to the path variable.
57 +* Ubuntu should now be a runnable program (press windows key, type ubuntu)
58 +* Open the ubuntu terminal, and finish the installation.
59 + ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
72 72  
73 -Below is the code needed to configure a different IP address range.
61 +===3.4 Installation requirements Windows Server 2012 R2 ===
62 +
63 +These are the requirements to allow the installation of the eMagiz Docker agent:
64 +* Ensure access to the following URLs is enabled
65 + ** registry.emagiz.com
66 + ** testing.emagiz.com
67 + ** Preferably the entry should be *.emagiz.com
68 +* Install & enable Hyper-V in Windows Server
69 + ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
70 + ** Restart windows
71 +* Download a ubuntu server 18.04 (https://releases.ubuntu.com/18.04/ubuntu-18.04.6-live-server-amd64.iso )
72 +* Create a VM in HyperV.
73 + ** For this, choose Generation 1, the amount of memory you want to assign to ubuntu and thus to the containers. Please consider the overhead for memory as well (such as OS).
74 + ** Configure a virtual switch.
75 + ** Add a virtual Hard Disk with proper sizing (e.g. 30 GB)
76 + ** Install an operating system from bootable CD/DVD, ISO file
77 +* Install ubuntu downloaded previously on the VM
78 +* Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
79 +
80 +=== 3.5 Installation agent ===
81 +
82 +eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal or is available upon request. Once that agent is installed, the image that is generated for every eMagiz release can be downloaded and installed in the Docker instance.
74 74  
75 -{{code language="cmd"}}
76 -cd C:\ProgramData\Docker\config\daemon.json
77 -#Add the following lines
78 -{"fixed-cidr": "<ip-address>"}
79 -{{/code}}
84 +== 4. Assignment ==
80 80  
81 -===== 3.2.2.2 Data location =====
86 +Check out the cheatcheet for Docker command line:
82 82  
83 -Below is an example of switching from the default C directory ({{code language="cmd"}}c:\programdata\docker{{/code}}) to the D directory to store Docker data. Based on your internal configuration, you can choose the best suitable variant if needed. To do so, you can add the following attribute to the Docker daemon file:
88 +[[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
84 84  
85 -{{code language="cmd"}}
86 -cd C:\ProgramData\Docker\config\daemon.json
87 -#Add the following lines
88 -{
89 - "data-root": "d:\\docker"
90 -}
91 -{{/code}}
90 +== 5. Key takeaways ==
92 92  
93 -{{warning}}Note that when you want to create multiple customizations to your configuration, the result in the daemon.json file should be a **valid** JSON structure{{/warning}}
92 +* eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
93 +* eMagiz has a specific agent that manages the download of that image to the on-premises server
94 +* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
94 94  
95 -==== 3.2.3 Check installation ====
96 96  
97 -After executing the commands above, the server will restart if required. After the restart, execute the following command
98 98  
99 -{{code language="cmd"}}
100 -docker ps
101 -{{/code}}
98 +== 6. Suggested Additional Readings ==
102 102  
103 -If the command returns "command not found," please run the following command again.
100 +N/A
101 +
102 +== 7. Silent demonstration video ==
104 104  
105 -{{code language="cmd"}}
106 -.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
107 -{{/code}}
104 +N/A
108 108  
109 -==== 3.2.3 Verify Docker functionality ====
110 -
111 -Execute the following command
112 -
113 -{{code language="cmd"}}
114 -docker ps
115 -{{/code}}
116 -
117 -The result of this call should show the following:
118 -
119 -[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
120 -
121 -==== 3.2.4 Install eMagiz Deploy Agent ====
122 -
123 -Install the eMagiz Deploy agent as described in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
124 -
125 -==== 3.3 Update Docker ====
126 -When you are advised to update your Docker version, you can verify whether you are on the correct Docker version by executing the following command in PowerShell with administrative rights:
127 -
128 -{{code language="cmd"}}
129 -docker version
130 -{{/code}}
131 -
132 -When this returns a version **lower** than the advised version shown below, you can update Docker on your machine. To do so, execute the following command in PowerShell with administrative rights:
133 -
134 -{{code language="cmd"}}
135 -.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
136 -{{/code}}
137 -
138 -===3.4 Uninstall Docker===
139 -To uninstall Docker from your machine, execute the following commands in PowerShell with administrative rights:
140 -
141 -{{code language="cmd"}}
142 -Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Uninstall-docker/uninstall-docker.ps1" -o uninstall-docker-ce.ps1
143 -{{/code}}
144 -
145 -Example usage:
146 -
147 -{{code language="cmd"}}
148 -.\uninstall-docker-ce.ps1
149 -{{/code}}
150 -
151 -== 4. Key takeaways ==
152 -
153 -* eMagiz uses runtime images to deploy the eMagiz runtime on Dockerized environments. The runtime image holds all the information and components required to run the runtime
154 -* eMagiz has a specific agent that manages the download of that image to the on-premises server
155 -* The firewall of the on-premises environment should allow outgoing traffic without any restrictions. If that is not desirable, eMagiz can provide the addresses and ports needed to set up the appropriate firewall rules.
156 -
157 -== 5. Suggested Additional Readings ==
158 -
159 -* [[Fundamentals (Navigation)>>doc:Main.eMagiz Academy.Fundamentals.WebHome||target="blank"]]
160 -** [[eMagiz Runtime Generation 3 (Explanation)>>doc:Main.eMagiz Academy.Fundamentals.fundamental-runtime-generation3||target="blank"]]
161 -* [[Release Information (Menu)>>doc:Main.Release Information.WebHome||target="blank"]]
162 -** [[Environment Templates (Navigation)>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]]
163 -* [[Intermediate (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.WebHome||target="blank"]]
164 -** [[eMagiz Runtime Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.WebHome||target="blank"]]
165 -*** [[Interpret on-premise logging (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-emagiz-runtime-management-interpret-on-premise-logging.WebHome||target="blank"]]
166 -*** [[eMagiz Deploy agent (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
167 -* [[Advanced (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.WebHome||target="blank"]]
168 -** [[Lifecycle Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.WebHome||target="blank"]]
169 -*** [[Impact of Runtime Image Upgrades (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.advanced-lifecycle-management-impact-of-runtime-image-upgrades.WebHome||target="blank"]]
170 -* [[Expert (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.WebHome||target="blank"]]
171 -** [[Solution Architecture (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.WebHome||target="blank"]]
172 -*** [[Install Docker for Linux (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-onpremises-server-linux-installguide.WebHome||target="blank"]]
173 -* [[Install Docker (Search Result)>>url:https://docs.emagiz.com/bin/view/Main/Search?sort=score&sortOrder=desc&highlight=true&facet=true&r=1&f_space_facet=0%2FMain.&f_type=DOCUMENT&f_locale=en&f_locale=&f_locale=en&text=install+docker||target="blank"]]
174 -* Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
175 -
176 176  )))((({{toc/}}))){{/container}}{{/container}}