Changes for page Install Docker for Windows

Last modified by Erik Bakker on 2026/04/21 12:15

From 37.1 to 38.1 From 150.1 to 151.1

From version 38.1

edited by Erik Bakker
on 2023/01/23 12:25

Change comment: There is no comment for this version

To version 150.1

edited by Erik Bakker
on 2026/04/21 12:06

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--On-premise Install Guide
++Install Docker for Windows

Content

@@ -1,5 +1,5 @@
  {{container}}{{container layoutStyle="columns"}}(((
--In this microlearning, we will focus on how the installation requirements for on-premises deployments of eMagiz runtimes that are part of the new runtime architecture. The new runtime architecture uses a containerized approach to deploy runtimes.
++In eMagiz's current runtime architecture, Docker technology is utilized to deploy runtimes efficiently. eMagiz provides specific runtime images that can be deployed within dockerized environments. This section outlines the steps needed to prepare a Windows server for the installation of the eMagiz Deploy Agent, which is responsible for downloading these images from the eMagiz infrastructure.
  Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
@@ -9,155 +9,174 @@
  * Good understanding of eMagiz runtimes in general
  == 2. Key concepts ==
--In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
--
--In the below section the specific operating systems and versions are discussed in a sense that the prerequisite installations are described. Once the right installation is done, refer to section 3.7 for the installation of the eMagiz agent that manages the interaction with the eMagiz platform. That agent will download the created docker images that will be deployed in the Docker environment.
--
++In the current runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
++
++In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
++
  == 3. On-premises deployments ==
  ===3.1 General requirements===
++
++{{info}}It is advised to use Docker version 29.1.3 as this is the version being used in the latest eMagiz cloud template. We advise aligning the on-premise Docker version and updating it according to the release notes of the [[Cloud templates>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]].
++{{/info}}
++
++{{info}}
++* When **your** security requirements require **DNS Whitelisting**, the following DNS-level configuration is needed to communicate with our infrastructure and the specific eMagiz model(s) you need to connect to. These IP addresses are subject to periodic change on our end.
--These are the general requirements to allow the installation of the eMagiz Docker agent:
--* Ensure access to the following URLs is enabled
--    ** registry.emagiz.com:8443
--    ** controlplane.emagiz.com:8000
--    ** Preferably the entry should be *.emagiz.com
++    ** registry.emagiz.com:443
++    ** controlplane.emagiz.com:443
++    ** controlplane-agent.emagiz.com:443
++    ** controltower.emagiz.com:443
++    ** controltower.kpn-dsh.com:443
++    ** controlbus.emagiz.com:443
++    ** {yourcloudslotid}.emagizcloud.com:8443
++
++* Preferably we suggest to implement the following entries on DNS level.
++    ** *.emagizcloud.com
++    ** *.emagiz.com
++    ** *.kpn-dsh.com{{/info}}
++{{warning}}
++* When **your** security requirements require **IP Whitelisting**, the following IP-level configuration is needed to communicate with our infrastructure and the specific eMagiz model(s) you need to connect to. These IP addresses are subject to periodic change on our end.
--===3.2 Installation requirements Linux===
++    ** 35.158.46.28:443
++    ** 3.74.190.88:443
++    ** 35.158.46.28:8443
++    ** 3.74.190.88:8443
++    ** 35.158.46.28:8444
++    ** 3.74.190.88:8444
++    ** 3.74.209.20:443
++    ** 3.76.127.155:443
++    ** 3.74.209.20:8443
++    ** 3.76.127.155:8443
++    ** 3.74.209.20:8444
++    ** 3.76.127.155:8444
++    ** 18.199.123.240
++    ** 18.184.211.189
++    ** 3.123.136.31{{/warning}}
--* Whenever Linux is selected as operating system, the latest version of Ubuntu will work
--* Install latest version of the Docker engine - see for instance {{code}}https://docs.docker.com/engine/install/ubuntu/{{/code}}
--* Go to the next section around installing the eMagiz agent
++===3.2 Installation Windows===
++When Windows is selected as the operating system, you need Windows Server 2022. Older Windows servers are **not** supported.
--===3.3 Installation requirements Windows Server 2022===
++==== 3.2.1 Docker Installation ====
++To install Docker on your machine, execute the following commands in PowerShell with administrative rights:
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install latest version of Docker Desktop from  {{code}}https://www.docker.com/products/docker-desktop/{{/code}}
--* Validate if WSL 2.0 is properly installed
--* Go to the next section around installing the eMagiz Docker agent
++{{code language="cmd"}}
++Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Install-update-docker/install-update-docker.ps1" -o install-update-docker-ce.ps1
++.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
++{{/code}}
--  #Install docker
--{{code language="unix"}}
--sudo apt-get update
--sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
--. /etc/os-release
--curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
--echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
--sudo apt update
--sudo apt install docker-ce docker-ce-cli containerd.io{{/code}}
++==== 3.2.2 Customization ====
--#Install Java
--{{code language="unix"}}
--wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
--echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
--sudo apt update # update if you haven't already
--sudo apt install temurin-8-jdk{{/code}}
++After installing Docker, you can stick with the standard configuration or adjust specific settings. Settings that can be of particular interest include the one that defines the IP address range your Docker installation will use to run containers, and the one that defines where to store data (i.e., containers and images). To check the full list of compatible configuration options for Windows, you can check: [[Configure Docker in Windows>>https://learn.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon||target="blank"]].
--#Autostart Dockerd with wsl
++{{warning}}Be aware that the customization will only take effect once you have restarted the machine.{{/warning}}
--nano .bashrc
++===== 3.2.2.1 IP address range =====
++
++Below is the code needed to configure a different IP address range.
--	DOCKER_DISTRO="Ubuntu"
--	DOCKER_LOG_DIR=$HOME/docker_logs
--	mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
--	/mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
++{{code language="cmd"}}
++cd C:\ProgramData\Docker\config\daemon.json
++#Add the following lines
++{"fixed-cidr": "<ip-address>"}
++{{/code}}
--#Do not ask password dockerd
--sudo visudo
++===== 3.2.2.2 Data location =====
++
++Below is an example of switching from the default C directory ({{code language="cmd"}}c:\programdata\docker{{/code}}) to the D directory to store Docker data. Based on your internal configuration, you can choose the best suitable variant if needed. To do so, you can add the following attribute to the Docker daemon file:
--	%docker ALL=(ALL)  NOPASSWD: /usr/bin/dockerd
++{{code language="cmd"}}
++cd C:\ProgramData\Docker\config\daemon.json
++#Add the following lines
++{
++ "data-root": "d:\\docker"
++}
++{{/code}}
--#Set WSL config for memory
--USERDIR/.wslconfig
--	# Settings apply across all Linux distros running on WSL 2
--	[wsl2]
++{{warning}}Note that when you want to create multiple customizations to your configuration, the result in the daemon.json file should be a **valid** JSON structure{{/warning}}
--	# Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
--	memory=16GB
++==== 3.2.3 Check installation ====
--	# Sets the VM to use two virtual processors
--	processors=2
--
--
--(Exit WSL: wsl --shutdown)
++After executing the commands above, the server will restart if required. After the restart, execute the following command
--===3.4 Installation requirements Windows Server 2019 version >1806===
++{{code language="cmd"}}
++docker ps
++{{/code}}
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install latest version of Docker Desktop from  https://www.docker.com/products/docker-desktop/
--* Validate if WSL 2.0 is properly installed
--* Go to the next section around installing the eMagiz Docker agent
--
--===3.5 Installation requirements Windows Server 2019 version 1806===
++If the command returns "command not found," please run the following command again.
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Enable Hyper-V in Windows Server
--  ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
--  ** Restart windows
--* Cross check is WSL 2.0 is installed
--  ** Use this command to get WSL 2.0: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
--* Install Docker Desktop on the Windows Server
--  ** Please refer to this link: https://www.docker.com/products/docker-desktop/
--  ** Restart windows
--* Update Docker Desktop configuration
--  ** Go to settings, and enable ‘Expose daemon on tcp://localhost:2375’ without TLS
--  ** Restart Docker
--* Open Powershell as Administrator
--  ** Execute "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
--  ** Execute Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
--  ** Execute curl.exe -L -o ubuntu-2004.appx https://aka.ms/wslubuntu2004
--  ** Execute Add-AppxPackage .\ubuntu-2004.appx
--    *** If errors occur, please consult https://learn.microsoft.com/en-us/windows/wsl/install-on-server. Rename the file to a zip, expand it, and add it to the path variable.
--* Ubuntu should now be a runnable program (press windows key, type ubuntu)
--* Open the ubuntu terminal, and finish the installation.
--  ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
--* Go to the next section around installing the eMagiz Docker agent
--
--===3.6 Installation requirements Windows Server 2012 R2 ===
--
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install & enable Hyper-V in Windows Server
--  ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
--  ** Restart windows
--* Download a ubuntu server 18.04 (https://releases.ubuntu.com/18.04/ubuntu-18.04.6-live-server-amd64.iso )
--* Create a VM in HyperV.
--  ** For this, choose Generation 1, the amount of memory you want to assign to ubuntu and thus to the containers. Please consider the overhead for memory as well (such as OS).
--  ** Configure a virtual switch.
--  ** Add a virtual Hard Disk with proper sizing (e.g. 30 GB)
--  ** Install an operating system from bootable CD/DVD, ISO file
--* Install ubuntu downloaded previously on the VM
--* Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
--* Go to the next section around installing the eMagiz agent
--
--=== 3.7 eMagiz Docker agent installation ===
--
--eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal under Deploy Architecture. At the runtime connector, there is a right click option called Deploy Agent. That presents either the command or the location where that agent is installed.
--
--[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-installguide-deployagent.png]]
++{{code language="cmd"}}
++.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
++{{/code}}
--After installing the agent, you can use the Docker cheat sheet below to see if the docker containers are running and/or images are available.
++==== 3.2.3 Verify Docker functionality ====
--== 4. Assignment ==
++Execute the following command
--Check out the cheatcheet for Docker command line:
--
--[[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
++{{code language="cmd"}}
++docker ps
++{{/code}}
--== 5. Key takeaways ==
++The result of this call should show the following:
--* eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
--* eMagiz has a specific agent that manages the download of that image to the on-premises server
--* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
++[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
++==== 3.2.4 Install eMagiz Deploy Agent ====
++Install the eMagiz Deploy agent as described in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
--== 6. Suggested Additional Readings ==
++=== 3.3 Update Docker ===
++When you are advised to update your Docker version, you can verify whether you are on the correct Docker version by executing the following command in PowerShell with administrative rights:
--N/A
--
--== 7. Silent demonstration video ==
++{{code language="cmd"}}
++docker version
++{{/code}}
--N/A
++When this returns a version **lower** than the advised version shown under the "General requirements" section, you can update Docker on your machine. To do so, execute the following command in PowerShell with administrative rights:
++{{code language="cmd"}}
++.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
++{{/code}}
++
++{{warning}}It may happen that, due to the update, your containers are no longer starting up. To resolve this, please restart the containers, which can be done via a deployment plan or the deploy architecture.{{/warning}}
++
++===3.4 Uninstall Docker===
++To uninstall Docker from your machine, execute the following commands in PowerShell with administrative rights:
++
++{{code language="cmd"}}
++Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Uninstall-docker/uninstall-docker.ps1" -o uninstall-docker-ce.ps1
++{{/code}}
++
++Example usage:
++
++{{code language="cmd"}}
++.\uninstall-docker-ce.ps1
++{{/code}}
++
++== 4. Key takeaways ==
++
++* eMagiz uses runtime images to deploy the eMagiz runtime on Dockerized environments. The runtime image holds all the information and components required to run the runtime
++* eMagiz has a specific agent that manages the download of that image to the on-premises server
++* The firewall of the on-premises environment should allow outgoing traffic without any restrictions. If that is not desirable, eMagiz can provide the addresses and ports needed to set up the appropriate firewall rules.
++
++== 5. Suggested Additional Readings ==
++
++* [[Fundamentals (Navigation)>>doc:Main.eMagiz Academy.Fundamentals.WebHome||target="blank"]]
++** [[eMagiz Runtime Generation 3 (Explanation)>>doc:Main.eMagiz Academy.Fundamentals.fundamental-runtime-generation3||target="blank"]]
++* [[Release Information (Menu)>>doc:Main.Release Information.WebHome||target="blank"]]
++** [[Environment Templates (Navigation)>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]]
++* [[Intermediate (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.WebHome||target="blank"]]
++** [[eMagiz Runtime Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.WebHome||target="blank"]]
++*** [[Interpret on-premise logging (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-emagiz-runtime-management-interpret-on-premise-logging.WebHome||target="blank"]]
++*** [[eMagiz Deploy agent (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
++* [[Advanced (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.WebHome||target="blank"]]
++** [[Lifecycle Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.WebHome||target="blank"]]
++*** [[Impact of Runtime Image Upgrades (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.advanced-lifecycle-management-impact-of-runtime-image-upgrades.WebHome||target="blank"]]
++* [[Expert (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.WebHome||target="blank"]]
++** [[Solution Architecture (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.WebHome||target="blank"]]
++*** [[Install Docker for Linux (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-onpremises-server-linux-installguide.WebHome||target="blank"]]
++* [[Install Docker (Search Result)>>url:https://docs.emagiz.com/bin/view/Main/Search?sort=score&sortOrder=desc&highlight=true&facet=true&r=1&f_space_facet=0%2FMain.&f_type=DOCUMENT&f_locale=en&f_locale=&f_locale=en&text=install+docker||target="blank"]]
++* Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
++
  )))((({{toc/}}))){{/container}}{{/container}}