Skip to Content
Last modified by Erik Bakker on 2025/04/18 13:54
From version 40.1
edited by Erik Bakker
on 2023/01/23 12:26
Change comment: There is no comment for this version
To version 108.1
edited by Carlijn Kokkeler
on 2024/03/28 10:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -On-premise Install Guide
1 +Install Docker for Windows
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.ebakker
1 +XWiki.CarlijnKokkeler
Content
... ... @@ -1,5 +1,5 @@
1 1  {{container}}{{container layoutStyle="columns"}}(((
2 -In this microlearning, we will focus on how the installation requirements for on-premises deployments of eMagiz runtimes that are part of the new runtime architecture. The new runtime architecture uses a containerized approach to deploy runtimes.
2 +In this microlearning, we will focus on how an on-premises server can be prepared for a eMagiz Deploy agent installation.
3 3  
4 4  Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
5 5  
... ... @@ -10,151 +10,101 @@
10 10  
11 11  == 2. Key concepts ==
12 12  In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
13 -
14 -In the below section the specific operating systems and versions are discussed in a sense that the prerequisite installations are described. Once the right installation is done, refer to section 3.7 for the installation of the eMagiz agent that manages the interaction with the eMagiz platform. That agent will download the created docker images that will be deployed in the Docker environment.
15 -
13 +
14 +In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
15 +
16 16  == 3. On-premises deployments ==
17 17  
18 18  ===3.1 General requirements===
19 -
20 -These are the general requirements to allow the installation of the eMagiz Docker agent:
21 -* Ensure access to the following URLs is enabled
22 - ** registry.emagiz.com:8443
19 +
20 +{{info}}
21 +* Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
22 + ** registry.emagiz.com:443
23 23   ** controlplane.emagiz.com:8000
24 + ** controltower.kpn-dsh.com:443
24 24   ** Preferably the entry should be *.emagiz.com
26 + ** Preferably the entry should be *.kpn-dsh.com{{/info}}
25 25  
26 -
27 -===3.2 Installation requirements Linux===
28 +{{warning}}
29 +* In case of a very strict firewall configuration, additional configuration is needed to communicate to the eMagiz infrastructure.
30 + ** controltower.emagiz.com:443
31 + ** controltower.kpn-dsh.com:443
32 + ** controlbus.emagiz.com:443
33 + ** controlplane.emagiz.com:443
28 28  
29 -* Whenever Linux is selected as operating system, the latest version of Ubuntu will work
30 -* Install latest version of the Docker engine - see for instance {{code}}https://docs.docker.com/engine/install/ubuntu/{{/code}}
31 -* Go to the next section around installing the eMagiz agent
35 +* When using cloudslot number **equal to or below** 125, the following configuration is needed to communicate to your JMS.
36 + ** 35.158.46.28:443
37 + ** 3.74.190.88:443
38 + ** 35.158.46.28:8443
39 + ** 3.74.190.88:8443
40 + ** 35.158.46.28:8444
41 + ** 3.74.190.88:8444
32 32  
33 -===3.3 Installation requirements Windows Server 2022===
43 +* When using a cloudslot number **above** 125, the following configuration is needed to communicate to your JMS.
44 + ** 3.74.209.20:443
45 + ** 3.76.127.155:443
46 + ** 3.74.209.20:8443
47 + ** 3.76.127.155:8443
48 + ** 3.74.209.20:8444
49 + ** 3.76.127.155:8444{{/warning}}
34 34  
35 -These are the requirements to allow the installation of the eMagiz Docker agent:
36 -* Install latest version of Docker Desktop from {{code}}https://www.docker.com/products/docker-desktop/{{/code}}
37 -* Validate if WSL 2.0 is properly installed
38 -* Go to the next section around installing the eMagiz Docker agent
51 +===3.2 Installation Windows===
52 +Whenever Windows is selected as operating system, you need to have a Windows Server 2022 version. Older Windows servers are **not** supported.
39 39  
40 - #Install docker
41 -sudo apt-get update
42 -sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
43 -. /etc/os-release
44 -curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
45 -echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
46 -sudo apt update
47 -sudo apt install docker-ce docker-ce-cli containerd.io
48 48  
49 -#Install Java
50 -wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
51 -echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
52 -sudo apt update # update if you haven't already
53 -sudo apt install temurin-8-jdk
55 +==== 3.2.1 Docker Installation ====
56 +To install or update docker on your machine, execute the following commands in powershell with administrative rights:
54 54  
55 -#Autostart Dockerd with wsl
58 +{{code language="cmd"}}
59 +Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/microsoft/Windows-Containers/Main/helpful_tools/Install-DockerCE/install-docker-ce.ps1" -o install-docker-ce.ps1
60 +.\install-docker-ce.ps1
61 +{{/code}}
56 56  
57 -nano .bashrc
63 +Example usage:
64 +{{code language="cmd"}}
65 +.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
66 +{{/code}}
58 58  
59 - DOCKER_DISTRO="Ubuntu"
60 - DOCKER_LOG_DIR=$HOME/docker_logs
61 - mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
62 - /mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
68 +To install the latest version of docker you can use {{code language="cmd"}}e .\install-update-docker-ce.ps1{{/code}} without specifying the version flag.
63 63  
64 -#Do not ask password dockerd
65 -sudo visudo
70 +==== 3.2.2 Check installation ====
66 66  
67 - %docker ALL=(ALL) NOPASSWD: /usr/bin/dockerd
72 +After executing the commands above, the server will restart if required. After the restart, execute the following command
68 68  
69 -#Set WSL config for memory
70 -USERDIR/.wslconfig
71 - # Settings apply across all Linux distros running on WSL 2
72 - [wsl2]
74 +{{code language="cmd"}}
75 +docker ps
76 +{{/code}}
73 73  
74 - # Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
75 - memory=16GB
78 +If the command returns that the command cannot be found, please run the following command again.
76 76  
77 - # Sets the VM to use two virtual processors
78 - processors=2
80 +{{code language="cmd"}}
81 +.\install-docker-ce.ps1
82 +{{/code}}
79 79  
80 -(Exit WSL: wsl --shutdown)
84 +==== 3.2.3 Verify docker functionality ====
81 81  
82 -===3.4 Installation requirements Windows Server 2019 version >1806===
86 +Execute the following command
83 83  
84 -These are the requirements to allow the installation of the eMagiz Docker agent:
85 -* Install latest version of Docker Desktop from https://www.docker.com/products/docker-desktop/
86 -* Validate if WSL 2.0 is properly installed
87 -* Go to the next section around installing the eMagiz Docker agent
88 +{{code language="cmd"}}
89 +docker ps
90 +{{/code}}
88 88  
89 -===3.5 Installation requirements Windows Server 2019 version 1806===
92 +The result of this call should show the following:
90 90  
91 -These are the requirements to allow the installation of the eMagiz Docker agent:
92 -* Enable Hyper-V in Windows Server
93 - ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
94 - ** Restart windows
95 -* Cross check is WSL 2.0 is installed
96 - ** Use this command to get WSL 2.0: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
97 -* Install Docker Desktop on the Windows Server
98 - ** Please refer to this link: https://www.docker.com/products/docker-desktop/
99 - ** Restart windows
100 -* Update Docker Desktop configuration
101 - ** Go to settings, and enable ‘Expose daemon on tcp://localhost:2375’ without TLS
102 - ** Restart Docker
103 -* Open Powershell as Administrator
104 - ** Execute "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
105 - ** Execute Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
106 - ** Execute curl.exe -L -o ubuntu-2004.appx https://aka.ms/wslubuntu2004
107 - ** Execute Add-AppxPackage .\ubuntu-2004.appx
108 - *** If errors occur, please consult https://learn.microsoft.com/en-us/windows/wsl/install-on-server. Rename the file to a zip, expand it, and add it to the path variable.
109 -* Ubuntu should now be a runnable program (press windows key, type ubuntu)
110 -* Open the ubuntu terminal, and finish the installation.
111 - ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
112 -* Go to the next section around installing the eMagiz Docker agent
94 +[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
113 113  
114 -===3.6 Installation requirements Windows Server 2012 R2 ===
96 +==== 3.2.4 Install eMagiz Deploy Agent ====
115 115  
116 -These are the requirements to allow the installation of the eMagiz Docker agent:
117 -* Install & enable Hyper-V in Windows Server
118 - ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
119 - ** Restart windows
120 -* Download a ubuntu server 18.04 (https://releases.ubuntu.com/18.04/ubuntu-18.04.6-live-server-amd64.iso )
121 -* Create a VM in HyperV.
122 - ** For this, choose Generation 1, the amount of memory you want to assign to ubuntu and thus to the containers. Please consider the overhead for memory as well (such as OS).
123 - ** Configure a virtual switch.
124 - ** Add a virtual Hard Disk with proper sizing (e.g. 30 GB)
125 - ** Install an operating system from bootable CD/DVD, ISO file
126 -* Install ubuntu downloaded previously on the VM
127 -* Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
128 -* Go to the next section around installing the eMagiz agent
98 +Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
129 129  
130 -=== 3.7 eMagiz Docker agent installation ===
100 +== 4. Key takeaways ==
131 131  
132 -eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal under Deploy Architecture. At the runtime connector, there is a right click option called Deploy Agent. That presents either the command or the location where that agent is installed.
133 -
134 -[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-installguide-deployagent.png]]
135 -
136 -After installing the agent, you can use the Docker cheat sheet below to see if the docker containers are running and/or images are available.
137 -
138 -== 4. Assignment ==
139 -
140 -Check out the cheatcheet for Docker command line:
141 -
142 -[[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
143 -
144 -== 5. Key takeaways ==
145 -
146 146  * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
147 147  * eMagiz has a specific agent that manages the download of that image to the on-premises server
148 148  * The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
149 149  
106 +== 5. Suggested Additional Readings ==
150 150  
108 +* Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
151 151  
152 -== 6. Suggested Additional Readings ==
153 -
154 -N/A
155 -
156 -== 7. Silent demonstration video ==
157 -
158 -N/A
159 -
160 160  )))((({{toc/}}))){{/container}}{{/container}}