Skip to Content
Last modified by Erik Bakker on 2025/04/18 13:54
From version 58.1
edited by eMagiz
on 2023/02/07 11:46
Change comment: There is no comment for this version
To version 25.1
edited by eMagiz
on 2022/11/15 14:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -On-premise Install Guide
1 +On-premises deployment new runtime architecture
Content
... ... @@ -11,7 +11,7 @@
11 11  == 2. Key concepts ==
12 12  In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
13 13  
14 -In the below section the specific operating systems and versions are discussed in a sense that the prerequisite installations are described. Once the right installation is done, refer to section 3.7 for the installation of the eMagiz agent that manages the interaction with the eMagiz platform. That agent will download the created docker images that will be deployed in the Docker environment.
14 +In the below section the specific operating systems and versions are discussed in a sense that the prerequisite installations are described. Once the right installation is done, refer to section 3.5 for the installation of the eMagiz agent that manages the interaction with the eMagiz platform. That agent will download the created docker images that will be deployed in the Docker environment.
15 15  
16 16  == 3. On-premises deployments ==
17 17  
... ... @@ -19,129 +19,36 @@
19 19  
20 20  These are the general requirements to allow the installation of the eMagiz Docker agent:
21 21  * Ensure access to the following URLs is enabled
22 - ** registry.emagiz.com:8443
23 - ** controlplane.emagiz.com:8000
22 + ** registry.emagiz.com
23 + ** testing.emagiz.com
24 24   ** Preferably the entry should be *.emagiz.com
25 -
26 26  
27 27  ===3.2 Installation requirements Linux===
28 28  
29 -* Whenever Linux is selected as operating system, the latest version of Ubuntu will work. Other Linux distributions will also work such as Debian or Red Hat.
30 -* Install latest version of the Docker engine - see for instance this link below. For other Linux distributions similar install guides are available on this link.
28 +* Install latest version of Docker
29 +* Go to the next section around installing the eMagiz agent
31 31  
32 -{{code}}https://docs.docker.com/engine/install/ubuntu/{{/code}}
31 +===3.2 Installation requirements Windows Server 2022===
33 33  
34 -
35 -* Install the eMagiz Deploy agent
36 -
37 -===3.3 Installation requirements Windows Server 2022 (Docker Desktop)===
38 -
39 39  These are the requirements to allow the installation of the eMagiz Docker agent:
40 -* Install latest version of Docker Desktop from
41 -
42 -{{code}}https://www.docker.com/products/docker-desktop/{{/code}}
43 -
34 +* Install latest version of Docker
44 44  * Validate if WSL 2.0 is properly installed
45 -* Install the eMagiz Deploy agent
36 +* Go to the next section around installing the eMagiz agent
46 46  
47 -===3.3 Installation requirements Windows Server 2022 (without Docker Desktop) ===
48 -The steps below will install a linux subsystem under Windows. In that Linux system, Docker and Java will be installed. Please note that the Windows server needs to be able to run Virtualized (either via BIOS setting or via Nested Virtualization).
38 + ===3.2 Installation requirements Windows Server 2019 version >1806===
49 49  
50 -**Step 1: Install linux distribution**
51 -
52 -{{code language="cmd"}}
53 - wsl --install -d Ubuntu
54 - sudo apt-get update
55 - sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
56 - . /etc/os-release
57 -{{/code}}
58 -
59 -
60 -**Step 2: Install Docker **
61 -
62 -{{code language="cmd"}}
63 - curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
64 - echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
65 - sudo apt update
66 - sudo apt install docker-ce docker-ce-cli containerd.io
67 -{{/code}}
68 -
69 -{{info}}
70 - Requires ~335 Mb space to install
71 -{{/info}}
72 -
73 -**Step 3: Install Java **
74 -
75 -{{code language="cmd"}}
76 - wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
77 - echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
78 - sudo apt update # update if you haven't already
79 - sudo apt install temurin-8-jdk
80 -{{/code}}
81 -
82 -{{info}}
83 - Requires ~335 Mb space to install
84 -{{/info}}
85 -
86 -**Step 4: Ensure Docker is autostarted with WSL **
87 -
88 -{{code language="cmd"}}
89 -nano .bashrc
90 -
91 - #Add following lines to bashrc
92 - DOCKER_DISTRO="Ubuntu"
93 - DOCKER_LOG_DIR=$HOME/docker_logs
94 - mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
95 - /mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
96 -{{/code}}
97 -
98 -**Step 5: Add user to Docker group **
99 -
100 -{{code language="cmd"}}
101 -sudo visudo
102 -
103 - #Add following lines
104 -
105 - # Don't ask for password
106 - %docker ALL=(ALL) NOPASSWD: /usr/bin/dockerd
107 -{{/code}}
108 -
109 -**Step 6: Update wsl config file **
110 -In this step we need to add or update the WSL config file that manages the resources of the Linux subsystem. Important resources to manage are the assigned memory and number of processors. For memory we recommend to review the mempory settings for the runtime that need to run on this server and add 762 MB to the total value of the heap and non-heap of these runtimes. For processor we recommend to set the value to 2 - depending on the amount of processors available on that machine
111 -
112 -First, locate the config file or add it to the location %USERPROFILE%. The name should be .wslconfig (no extension)
113 -
114 -
115 -{{code language="cmd"}}
116 - #Add following lines
117 -
118 - # Settings apply across all Linux distros running on WSL 2
119 - [wsl2]
120 - # Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
121 - memory=16GB
122 - # Sets the VM to use two virtual processors
123 - processors=2
124 -{{/code}}
125 -
126 -
127 -**Step 7: Auto start the linux subsystem when server restarts **
128 -
129 -
130 -===3.4 Installation requirements Windows Server 2019 version >1806===
131 -
132 132  These are the requirements to allow the installation of the eMagiz Docker agent:
133 -* Install latest version of Docker Desktop from https://www.docker.com/products/docker-desktop/
41 +* Install latest version of Docker
134 134  * Validate if WSL 2.0 is properly installed
135 -* Go to the next section around installing the eMagiz Docker agent
43 +* Go to the next section around installing the eMagiz agent
44 +
45 +
46 +===3.3 Installation requirements Windows Server 2019 version 1806===
136 136  
137 -===3.5 Installation requirements Windows Server 2019 version 1806===
138 -
139 139  These are the requirements to allow the installation of the eMagiz Docker agent:
140 140  * Enable Hyper-V in Windows Server
141 141   ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
142 142   ** Restart windows
143 -* Cross check is WSL 2.0 is installed
144 - ** Use this command to get WSL 2.0: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
145 145  * Install Docker Desktop on the Windows Server
146 146   ** Please refer to this link: https://www.docker.com/products/docker-desktop/
147 147   ** Restart windows
... ... @@ -157,10 +157,10 @@
157 157  * Ubuntu should now be a runnable program (press windows key, type ubuntu)
158 158  * Open the ubuntu terminal, and finish the installation.
159 159   ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
160 -* Go to the next section around installing the eMagiz Docker agent
161 -
162 -===3.6 Installation requirements Windows Server 2012 R2 ===
163 -
67 +* Go to the next section around installing the eMagiz agent
68 +
69 +===3.4 Installation requirements Windows Server 2012 R2 ===
70 +
164 164  These are the requirements to allow the installation of the eMagiz Docker agent:
165 165  * Install & enable Hyper-V in Windows Server
166 166   ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
... ... @@ -174,19 +174,22 @@
174 174  * Install ubuntu downloaded previously on the VM
175 175  * Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
176 176  * Go to the next section around installing the eMagiz agent
84 +
85 +=== 3.5 eMagiz agent installation agent ===
86 +
87 +eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal or is available upon request. Once that agent is installed, the image that is generated for every eMagiz release can be downloaded and installed in the Docker instance.
177 177  
178 -=== 3.7 eMagiz Docker agent installation ===
89 +After installing the agent, validate it runs by checking if a docker container runs on ubuntu.
90 +* wget https://download.docker.com/linux/static/stable/x86_64/docker-20.10.5.tgz
91 +* tar zxvf docker-20.10.5.tgz
92 +* cd docker
93 +* ./docker psg
179 179  
180 -eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal under Deploy Architecture. At the runtime connector, there is a right click option called Deploy Agent. That presents either the command or the location where that agent is installed.
181 181  
182 -[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-installguide-deployagent.png]]
183 -
184 -After installing the agent, you can use the Docker cheat sheet below to see if the docker containers are running and/or images are available.
185 -
186 186  == 4. Assignment ==
187 187  
188 188  Check out the cheatcheet for Docker command line:
189 -
99 +
190 190  [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
191 191  
192 192  == 5. Key takeaways ==
... ... @@ -193,7 +193,7 @@
193 193  
194 194  * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
195 195  * eMagiz has a specific agent that manages the download of that image to the on-premises server
196 -* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
106 +* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
197 197  
198 198  
199 199