Skip to Content
Last modified by Erik Bakker on 2025/04/18 13:54
From version 63.1
edited by eMagiz
on 2023/02/07 12:28
Change comment: There is no comment for this version
To version 42.1
edited by eMagiz
on 2023/01/26 08:57
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -26,112 +26,75 @@
26 26  
27 27  ===3.2 Installation requirements Linux===
28 28  
29 -Whenever Linux is selected as operating system, the latest version of Ubuntu will work. Other Linux distributions will also work such as Debian or Red Hat.
30 -**Step 1: Install linux distribution**
31 -Follow all steps in section 3.4
29 +* Whenever Linux is selected as operating system, the latest version of Ubuntu will work
30 +* Install latest version of the Docker engine - see for instance {{code}}https://docs.docker.com/engine/install/ubuntu/{{/code}}
31 +* Go to the next section around installing the eMagiz agent
32 32  
33 -**Step 2: Install eMagiz Deploy Agent**
34 -Install the eMagiz Deploy agent as can be found here
33 +===3.3 Installation requirements Windows Server 2022===
35 35  
36 -===3.3 Installation requirements Windows Server 2022 ===
35 +These are the requirements to allow the installation of the eMagiz Docker agent:
36 +* Install latest version of Docker Desktop from {{code}}https://www.docker.com/products/docker-desktop/{{/code}}
37 +* Validate if WSL 2.0 is properly installed
38 +* Go to the next section around installing the eMagiz Docker agent
37 37  
38 -{{info}}Please note that this section also applies to Windows Server 2019 version >1806{{/info}}
39 -
40 -The steps below will install a linux subsystem under Windows. In that Linux system, Docker and Java will be installed. Please note that the Windows server needs to be able to run Virtualized (either via BIOS setting or via Nested Virtualization).
41 -
42 -**Step 1: Install linux distribution**
43 -
40 +Step 1: Install linux distribution
44 44  {{code language="cmd"}}
45 - wsl --install -d Ubuntu
46 - sudo apt-get update
47 - sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
48 - . /etc/os-release
49 -{{/code}}
42 + wsl --install -d Ubuntu
43 +{{//code}}
44 +
45 + #Install docker
46 +sudo apt-get update
47 +sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
48 +. /etc/os-release
49 +curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
50 +echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
51 +sudo apt update
52 +sudo apt install docker-ce docker-ce-cli containerd.io
50 50  
51 -**Step 2: Configure linux system**
52 -Please see section 3.4 for these these steps
53 -
54 -**Step 3: Update wsl config file **
55 -In this step we need to add or update the WSL config file that manages the resources of the Linux subsystem. Important resources to manage are the assigned memory and number of processors. For memory we recommend to review the mempory settings for the runtime that need to run on this server and add 762 MB to the total value of the heap and non-heap of these runtimes. For processor we recommend to set the value to 2 - depending on the amount of processors available on that machine
54 +#Install Java
55 +wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
56 +echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
57 +sudo apt update # update if you haven't already
58 +sudo apt install temurin-8-jdk
56 56  
57 -First, locate the config file or add it to the location %USERPROFILE%. The name should be .wslconfig (no extension)
60 +#Autostart Dockerd with wsl
58 58  
59 -{{code language="cmd"}}
60 - #Add following lines
61 -
62 - # Settings apply across all Linux distros running on WSL 2
63 - [wsl2]
64 - # Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
65 - memory=16GB
66 - # Sets the VM to use two virtual processors
67 - processors=2
68 -{{/code}}
69 -
70 -
71 -**Step 4: Auto start the linux subsystem when Windows server restarts **
72 -
73 -**Step 5: Install eMagiz Deploy Agent**
74 -Install the eMagiz Deploy agent as can be found here
75 -
76 -
77 -===3.4 Installation steps to configure Linux subsystem ===
78 -
79 -**Step 1: Install Docker **
80 -
81 -{{code language="cmd"}}
82 - curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
83 - echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
84 - sudo apt update
85 - sudo apt install docker-ce docker-ce-cli containerd.io
86 -{{/code}}
87 -
88 -{{info}}
89 - Requires ~335 Mb space to install
90 -{{/info}}
91 -
92 -**Step 2: Install Java **
93 -
94 -{{code language="cmd"}}
95 - wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
96 - echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
97 - sudo apt update # update if you haven't already
98 - sudo apt install temurin-8-jdk
99 -{{/code}}
100 -
101 -{{info}}
102 - Requires ~335 Mb space to install
103 -{{/info}}
104 -
105 -**Step 3: Ensure Docker is autostarted with WSL **
106 -
107 -{{code language="cmd"}}
108 108  nano .bashrc
109 109  
110 - #Add following lines to bashrc
111 111   DOCKER_DISTRO="Ubuntu"
112 112   DOCKER_LOG_DIR=$HOME/docker_logs
113 113   mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
114 114   /mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
115 -{{/code}}
116 116  
117 -**Step 4: Add user to Docker group **
118 -
119 -{{code language="cmd"}}
69 +#Do not ask password dockerd
120 120  sudo visudo
121 121  
122 - #Add following lines
72 + %docker ALL=(ALL) NOPASSWD: /usr/bin/dockerd
123 123  
124 - # Don't ask for password
125 - %docker ALL=(ALL) NOPASSWD: /usr/bin/dockerd
126 -{{/code}}
74 +#Set WSL config for memory
75 +USERDIR/.wslconfig
76 + # Settings apply across all Linux distros running on WSL 2
77 + [wsl2]
127 127  
128 -
79 + # Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
80 + memory=16GB
129 129  
130 -===3.5 Installation requirements Windows Server 2019 version 1806===
82 + # Sets the VM to use two virtual processors
83 + processors=2
131 131  
132 -{{warning}}Please note that this section is under construction. Please contact us at productmanagement@emagiz.com{{/warning}}
85 +(Exit WSL: wsl --shutdown)
86 + {{/code}}
133 133  
88 +===3.4 Installation requirements Windows Server 2019 version >1806===
89 +
134 134  These are the requirements to allow the installation of the eMagiz Docker agent:
91 +* Install latest version of Docker Desktop from https://www.docker.com/products/docker-desktop/
92 +* Validate if WSL 2.0 is properly installed
93 +* Go to the next section around installing the eMagiz Docker agent
94 +
95 +===3.5 Installation requirements Windows Server 2019 version 1806===
96 +
97 +These are the requirements to allow the installation of the eMagiz Docker agent:
135 135  * Enable Hyper-V in Windows Server
136 136   ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
137 137   ** Restart windows
... ... @@ -156,8 +156,6 @@
156 156  
157 157  ===3.6 Installation requirements Windows Server 2012 R2 ===
158 158  
159 -{{warning}}Please note that this section is under construction. Please contact us at productmanagement@emagiz.com{{/warning}}
160 -
161 161  These are the requirements to allow the installation of the eMagiz Docker agent:
162 162  * Install & enable Hyper-V in Windows Server
163 163   ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.