Skip to Content
Last modified by Erik Bakker on 2025/04/18 13:54
From version 9.1
edited by eMagiz
on 2022/10/19 08:41
Change comment: There is no comment for this version
To version 44.1
edited by eMagiz
on 2023/01/26 10:02
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -On-premises deployment new runtime architecture
1 +On-premise Install Guide
Content
... ... @@ -1,11 +1,8 @@
1 1  {{container}}{{container layoutStyle="columns"}}(((
2 2  In this microlearning, we will focus on how the installation requirements for on-premises deployments of eMagiz runtimes that are part of the new runtime architecture. The new runtime architecture uses a containerized approach to deploy runtimes.
3 -
3 +
4 4  Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
5 5  
6 -* Last update: June 24th 2021
7 -* Required reading time: 10 minutes
8 -
9 9  == 1. Prerequisites ==
10 10  
11 11  * Advanced knowledge of the eMagiz platform
... ... @@ -12,35 +12,146 @@
12 12  * Good understanding of eMagiz runtimes in general
13 13  
14 14  == 2. Key concepts ==
15 -In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized envirionments
12 +In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
16 16  
14 +In the below section the specific operating systems and versions are discussed in a sense that the prerequisite installations are described. Once the right installation is done, refer to section 3.7 for the installation of the eMagiz agent that manages the interaction with the eMagiz platform. That agent will download the created docker images that will be deployed in the Docker environment.
15 +
17 17  == 3. On-premises deployments ==
18 18  
19 -===3.1 Installation requirements===
20 -Below the list of requirements for an on-premises deployment
18 +===3.1 General requirements===
19 +
20 +These are the general requirements to allow the installation of the eMagiz Docker agent:
21 +* Ensure access to the following URLs is enabled
22 + ** registry.emagiz.com:8443
23 + ** controlplane.emagiz.com:8000
24 + ** Preferably the entry should be *.emagiz.com
21 21  
22 -* Windows Server or Linux Server
23 -* Installed Docker software - latest version
24 -* Optional: Install Docker Desktop for Windows
25 - ** See also [[Install guide Docker>>https://docs.docker.com/desktop/install/windows-install/]]
26 -* Docker software installed requires use of the LinuxEngine
27 - ** Use command line option to switch to the option"C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
28 -* Server connected to the internet whereby the firewall doesn't prevent data traffic going outwards to the Internet
29 - ** In case there are outgoing firewall rules, eMagiz can provide the specific URL's and port numbers in order to update the firewall
30 -* Sufficient resources in line with the requirements of the eMagiz runtimes. See this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-determining-needed-memory.WebHome||target="blank"]]
31 31  
32 -=== 3.2 Installation agent ===
27 +===3.2 Installation requirements Linux===
28 +
29 +* Whenever Linux is selected as operating system, the latest version of Ubuntu will work
30 +* Install latest version of the Docker engine - see for instance {{code}}https://docs.docker.com/engine/install/ubuntu/{{/code}}
31 +* Go to the next section around installing the eMagiz agent
32 +
33 +===3.3 Installation requirements Windows Server 2022===
34 +
35 +These are the requirements to allow the installation of the eMagiz Docker agent:
36 +* Install latest version of Docker Desktop from {{code}}https://www.docker.com/products/docker-desktop/{{/code}}
37 +* Validate if WSL 2.0 is properly installed
38 +* Go to the next section around installing the eMagiz Docker agent
39 +
40 +===3.3 Installation requirements Windows Server 2022 (without Docker Desktop) ===
33 33  
34 -eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal or is available upon request. Once that agent is installed, the image that is generated for every eMagiz release can be downloaded and installed in the Docker instance.
42 +**Step 1: Install linux distribution**
35 35  
36 -=== 3.3 Cloud architecture for API Gateway ===
37 -
38 -[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-install-runtime-images.png]]
44 +{{code language="cmd"}}
45 +wsl --install -d Ubuntu
46 +{{/code}}
39 39  
48 +
49 +#Install docker
50 +sudo apt-get update
51 +sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
52 +. /etc/os-release
53 +curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
54 +echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
55 +sudo apt update
56 +sudo apt install docker-ce docker-ce-cli containerd.io
57 +
58 +#Install Java
59 +wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
60 +echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
61 +sudo apt update # update if you haven't already
62 +sudo apt install temurin-8-jdk
63 +
64 +#Autostart Dockerd with wsl
65 +
66 +nano .bashrc
67 +
68 + DOCKER_DISTRO="Ubuntu"
69 + DOCKER_LOG_DIR=$HOME/docker_logs
70 + mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
71 + /mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
72 +
73 +#Do not ask password dockerd
74 +sudo visudo
75 +
76 + %docker ALL=(ALL) NOPASSWD: /usr/bin/dockerd
77 +
78 +#Set WSL config for memory
79 +USERDIR/.wslconfig
80 + # Settings apply across all Linux distros running on WSL 2
81 + [wsl2]
82 +
83 + # Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
84 + memory=16GB
85 +
86 + # Sets the VM to use two virtual processors
87 + processors=2
88 +
89 +(Exit WSL: wsl --shutdown)
90 + {{/code}}
91 +
92 +===3.4 Installation requirements Windows Server 2019 version >1806===
93 +
94 +These are the requirements to allow the installation of the eMagiz Docker agent:
95 +* Install latest version of Docker Desktop from https://www.docker.com/products/docker-desktop/
96 +* Validate if WSL 2.0 is properly installed
97 +* Go to the next section around installing the eMagiz Docker agent
98 +
99 +===3.5 Installation requirements Windows Server 2019 version 1806===
100 +
101 +These are the requirements to allow the installation of the eMagiz Docker agent:
102 +* Enable Hyper-V in Windows Server
103 + ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
104 + ** Restart windows
105 +* Cross check is WSL 2.0 is installed
106 + ** Use this command to get WSL 2.0: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
107 +* Install Docker Desktop on the Windows Server
108 + ** Please refer to this link: https://www.docker.com/products/docker-desktop/
109 + ** Restart windows
110 +* Update Docker Desktop configuration
111 + ** Go to settings, and enable ‘Expose daemon on tcp://localhost:2375’ without TLS
112 + ** Restart Docker
113 +* Open Powershell as Administrator
114 + ** Execute "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
115 + ** Execute Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
116 + ** Execute curl.exe -L -o ubuntu-2004.appx https://aka.ms/wslubuntu2004
117 + ** Execute Add-AppxPackage .\ubuntu-2004.appx
118 + *** If errors occur, please consult https://learn.microsoft.com/en-us/windows/wsl/install-on-server. Rename the file to a zip, expand it, and add it to the path variable.
119 +* Ubuntu should now be a runnable program (press windows key, type ubuntu)
120 +* Open the ubuntu terminal, and finish the installation.
121 + ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
122 +* Go to the next section around installing the eMagiz Docker agent
123 +
124 +===3.6 Installation requirements Windows Server 2012 R2 ===
125 +
126 +These are the requirements to allow the installation of the eMagiz Docker agent:
127 +* Install & enable Hyper-V in Windows Server
128 + ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
129 + ** Restart windows
130 +* Download a ubuntu server 18.04 (https://releases.ubuntu.com/18.04/ubuntu-18.04.6-live-server-amd64.iso )
131 +* Create a VM in HyperV.
132 + ** For this, choose Generation 1, the amount of memory you want to assign to ubuntu and thus to the containers. Please consider the overhead for memory as well (such as OS).
133 + ** Configure a virtual switch.
134 + ** Add a virtual Hard Disk with proper sizing (e.g. 30 GB)
135 + ** Install an operating system from bootable CD/DVD, ISO file
136 +* Install ubuntu downloaded previously on the VM
137 +* Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
138 +* Go to the next section around installing the eMagiz agent
139 +
140 +=== 3.7 eMagiz Docker agent installation ===
141 +
142 +eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal under Deploy Architecture. At the runtime connector, there is a right click option called Deploy Agent. That presents either the command or the location where that agent is installed.
143 +
144 +[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-installguide-deployagent.png]]
145 +
146 +After installing the agent, you can use the Docker cheat sheet below to see if the docker containers are running and/or images are available.
147 +
40 40  == 4. Assignment ==
41 41  
42 42  Check out the cheatcheet for Docker command line:
43 -
151 +
44 44  [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
45 45  
46 46  == 5. Key takeaways ==
... ... @@ -47,7 +47,7 @@
47 47  
48 48  * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
49 49  * eMagiz has a specific agent that manages the download of that image to the on-premises server
50 -* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
158 +* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
51 51  
52 52  
53 53