Skip to Content

Wiki source code of Install Docker for Windows

Version 105.1 by Erik Bakker on 2024/03/12 10:24
Show last authors
1 {{container}}{{container layoutStyle="columns"}}(((
2 In this microlearning, we will focus on how an on-premises server can be prepared for a eMagiz Deploy agent installation.
3
4 Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
5
6 == 1. Prerequisites ==
7
8 * Advanced knowledge of the eMagiz platform
9 * Good understanding of eMagiz runtimes in general
10
11 == 2. Key concepts ==
12 In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
13
14 In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
15
16 == 3. On-premises deployments ==
17
18 ===3.1 General requirements===
19
20 {{info}}
21 * Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
22 ** registry.emagiz.com:443
23 ** controlplane.emagiz.com:8000
24 ** controltower.kpn-dsh.com:443
25 ** Preferably the entry should be *.emagiz.com
26 ** ** Preferably the entry should be *.kpn-dsh.com{{/info}}
27
28 {{warning}}
29 * In case of a very strict firewall configuration, additional configuration is needed to communicate to the eMagiz infrastructure.
30 ** controltower.emagiz.com:443
31 ** controltower.kpn-dsh.com:443
32 ** controlbus.emagiz.com:443
33 ** controlplane.emagiz.com:443
34
35 * When using cloudslot number **equal to or below** 125, the following configuration is needed to communicate to your JMS.
36 ** 35.158.46.28:443
37 ** 3.74.190.88:443
38 ** 35.158.46.28:8443
39 ** 3.74.190.88:8443
40 ** 35.158.46.28:8444
41 ** 3.74.190.88:8444
42
43 * When using a cloudslot number **above** 125, the following configuration is needed to communicate to your JMS.
44 ** 3.74.209.20:443
45 ** 3.76.127.155:443
46 ** 3.74.209.20:8443
47 ** 3.76.127.155:8443
48 ** 3.74.209.20:8444
49 ** 3.76.127.155:8444{{/warning}}
50
51 ===3.2 Installation Windows===
52 Whenever Windows is selected as operating system, you need to have a Windows Server 2022 version. Older Windows servers are **not** supported.
53
54
55 ==== 3.2.1 Docker Installation ====
56 In powershell with administrative rights, execute the following commands
57
58 {{code language="cmd"}}
59 Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/microsoft/Windows-Containers/Main/helpful_tools/Install-DockerCE/install-docker-ce.ps1" -o install-docker-ce.ps1
60 .\install-docker-ce.ps1
61 {{/code}}
62
63 ==== 3.2.2 Check installation ====
64
65 After executing the commands above, the server will restart if required. After the restart, execute the following command
66
67 {{code language="cmd"}}
68 docker ps
69 {{/code}}
70
71 If the command returns that the command cannot be found, please run the following command again.
72
73 {{code language="cmd"}}
74 .\install-docker-ce.ps1
75 {{/code}}
76
77 ==== 3.2.3 Verify docker functionality ====
78
79 Execute the following command
80
81 {{code language="cmd"}}
82 docker ps
83 {{/code}}
84
85 The result of this call should show the following:
86
87 [[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
88
89 ==== 3.2.4 Install eMagiz Deploy Agent ====
90
91 Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
92
93 == 4. Key takeaways ==
94
95 * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
96 * eMagiz has a specific agent that manages the download of that image to the on-premises server
97 * The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
98
99 == 5. Suggested Additional Readings ==
100
101 * Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
102
103 )))((({{toc/}}))){{/container}}{{/container}}