Skip to Content

Wiki source code of Install Docker for Windows

Version 124.1 by CarlijnKokkeler on 2024/03/28 11:03
Hide last authors
eMagiz 1.1 1 {{container}}{{container layoutStyle="columns"}}(((
eMagiz 70.1 2 In this microlearning, we will focus on how an on-premises server can be prepared for a eMagiz Deploy agent installation.
Erik Bakker 15.1 3
eMagiz 1.1 4 Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
5
6 == 1. Prerequisites ==
7
8 * Advanced knowledge of the eMagiz platform
eMagiz 3.1 9 * Good understanding of eMagiz runtimes in general
eMagiz 1.1 10
11 == 2. Key concepts ==
eMagiz 25.1 12 In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
Erik Bakker 95.1 13
14 In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
15
eMagiz 3.1 16 == 3. On-premises deployments ==
eMagiz 25.1 17
18 ===3.1 General requirements===
Erik Bakker 99.1 19
20 {{info}}
21 * Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
22 ** registry.emagiz.com:443
23 ** controlplane.emagiz.com:8000
Erik Bakker 105.1 24 ** controltower.kpn-dsh.com:443
25 ** Preferably the entry should be *.emagiz.com
Erik Bakker 106.1 26 ** Preferably the entry should be *.kpn-dsh.com{{/info}}
Erik Bakker 99.1 27
Eva Torken 101.1 28 {{warning}}
Erik Bakker 103.1 29 * In case of a very strict firewall configuration, additional configuration is needed to communicate to the eMagiz infrastructure.
Eva Torken 101.1 30 ** controltower.emagiz.com:443
Erik Bakker 105.1 31 ** controltower.kpn-dsh.com:443
Eva Torken 101.1 32 ** controlbus.emagiz.com:443
33 ** controlplane.emagiz.com:443
34
Erik Bakker 103.1 35 * When using cloudslot number **equal to or below** 125, the following configuration is needed to communicate to your JMS.
Eva Torken 101.1 36 ** 35.158.46.28:443
37 ** 3.74.190.88:443
38 ** 35.158.46.28:8443
39 ** 3.74.190.88:8443
40 ** 35.158.46.28:8444
Erik Bakker 103.1 41 ** 3.74.190.88:8444
Eva Torken 101.1 42
Erik Bakker 103.1 43 * When using a cloudslot number **above** 125, the following configuration is needed to communicate to your JMS.
44 ** 3.74.209.20:443
45 ** 3.76.127.155:443
46 ** 3.74.209.20:8443
47 ** 3.76.127.155:8443
48 ** 3.74.209.20:8444
49 ** 3.76.127.155:8444{{/warning}}
50
Erik Bakker 95.1 51 ===3.2 Installation Windows===
Erik Bakker 104.1 52 Whenever Windows is selected as operating system, you need to have a Windows Server 2022 version. Older Windows servers are **not** supported.
eMagiz 1.1 53
eMagiz 57.1 54
Erik Bakker 95.1 55 ==== 3.2.1 Docker Installation ====
CarlijnKokkeler 108.1 56 To install or update docker on your machine, execute the following commands in powershell with administrative rights:
eMagiz 18.1 57
eMagiz 42.1 58 {{code language="cmd"}}
Erik Bakker 95.1 59 Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/microsoft/Windows-Containers/Main/helpful_tools/Install-DockerCE/install-docker-ce.ps1" -o install-docker-ce.ps1
60 .\install-docker-ce.ps1
eMagiz 43.1 61 {{/code}}
eMagiz 44.1 62
CarlijnKokkeler 122.1 63 {{info}}It is advised to use Docker version 24.0.7 as this is the version being used in the latest eMagiz cloud template. We advise to align the on-premise Docker version and update it according to the release notes of the [[Cloud templates>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]].
64 {{/info}}
65
Erik Bakker 95.1 66 ==== 3.2.2 Check installation ====
Erik Bakker 91.1 67
Erik Bakker 95.1 68 After executing the commands above, the server will restart if required. After the restart, execute the following command
eMagiz 44.1 69
eMagiz 45.1 70 {{code language="cmd"}}
Erik Bakker 95.1 71 docker ps
eMagiz 62.1 72 {{/code}}
73
Erik Bakker 95.1 74 If the command returns that the command cannot be found, please run the following command again.
eMagiz 72.1 75
76 {{code language="cmd"}}
Erik Bakker 95.1 77 .\install-docker-ce.ps1
eMagiz 47.1 78 {{/code}}
eMagiz 24.1 79
Erik Bakker 95.1 80 ==== 3.2.3 Verify docker functionality ====
eMagiz 45.1 81
Erik Bakker 95.1 82 Execute the following command
eMagiz 50.1 83
eMagiz 49.1 84 {{code language="cmd"}}
Erik Bakker 95.1 85 docker ps
eMagiz 49.1 86 {{/code}}
eMagiz 32.1 87
Erik Bakker 95.1 88 The result of this call should show the following:
eMagiz 51.1 89
Erik Bakker 97.1 90 [[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
eMagiz 52.1 91
Erik Bakker 95.1 92 ==== 3.2.4 Install eMagiz Deploy Agent ====
eMagiz 52.1 93
Erik Bakker 97.1 94 Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
eMagiz 52.1 95
CarlijnKokkeler 115.1 96 ===3.3 Uninstall Docker===
97 To uninstall docker from your machine, execute the following commands in powershell with administrative rights:
98
99 {{code language="cmd"}}
100 Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Uninstall-docker/uninstall-docker.ps1" -o uninstall-docker-ce.ps1
101 {{/code}}
102
103 Example usage:
104
105 {{code language="cmd"}}
106 .\uninstall-docker-ce.ps1
107 {{/code}}
108
CarlijnKokkeler 116.1 109 {{info}}
110 By default the docker daemon configuration file is located in the docker data path at {{code language="cmd"}}C:\ProgramData\docker\config\daemon.json{{/code}}.
CarlijnKokkeler 118.1 111 To check the configuration options and compatible options with Windows you can check: [[Configure Docker in Windows>>https://learn.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon||target="blank"]].
CarlijnKokkeler 116.1 112
CarlijnKokkeler 118.1 113 {{warning}}
114 Ignore the Uninstall section as it is outdated (For Windows Server 2016), instead refer to the previous section to Uninstall docker
115 {{/warning}}
116
117 **Example usage of the Docker daemon file**: You maybe want the Docker daemon to keep images and containers in an alternate path (D:
118 drive for example). To do so you can add the following attribute to the Docker daemon file:
119
120 {{code language="cmd"}}
121 {
122 "data-root": "d:\\docker"
123 }
124 {{/code}}
125
CarlijnKokkeler 124.1 126 If not specified, the default is {{code language="cmd"}}c:\programdata\docker{{/code}}.
CarlijnKokkeler 118.1 127
CarlijnKokkeler 124.1 128 {{/info}}
CarlijnKokkeler 116.1 129
Erik Bakker 91.1 130 == 4. Key takeaways ==
eMagiz 1.1 131
eMagiz 5.1 132 * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
133 * eMagiz has a specific agent that manages the download of that image to the on-premises server
Erik Bakker 40.1 134 * The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
eMagiz 1.1 135
Erik Bakker 91.1 136 == 5. Suggested Additional Readings ==
eMagiz 1.1 137
Erik Bakker 91.1 138 * Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
eMagiz 1.1 139
140 )))((({{toc/}}))){{/container}}{{/container}}