Skip to Content

Wiki source code of Install Docker for Windows

Version 149.1 by Erik Bakker on 2026/04/21 12:04
Hide last authors
eMagiz 1.1 1 {{container}}{{container layoutStyle="columns"}}(((
Erik Bakker 133.1 2 In eMagiz's current runtime architecture, Docker technology is utilized to deploy runtimes efficiently. eMagiz provides specific runtime images that can be deployed within dockerized environments. This section outlines the steps needed to prepare a Windows server for the installation of the eMagiz Deploy Agent, which is responsible for downloading these images from the eMagiz infrastructure.
Erik Bakker 15.1 3
eMagiz 1.1 4 Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
5
6 == 1. Prerequisites ==
7
8 * Advanced knowledge of the eMagiz platform
eMagiz 3.1 9 * Good understanding of eMagiz runtimes in general
eMagiz 1.1 10
11 == 2. Key concepts ==
Erik Bakker 133.1 12 In the current runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
Erik Bakker 95.1 13
14 In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
15
eMagiz 3.1 16 == 3. On-premises deployments ==
eMagiz 25.1 17
18 ===3.1 General requirements===
Erik Bakker 99.1 19
Erik Bakker 146.1 20 {{info}}It is advised to use Docker version 29.1.3 as this is the version being used in the latest eMagiz cloud template. We advise aligning the on-premise Docker version and updating it according to the release notes of the [[Cloud templates>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]].
Erik Bakker 142.1 21 {{/info}}
22
Erik Bakker 99.1 23 {{info}}
24 * Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
25 ** registry.emagiz.com:443
Bas Elzinga 138.2 26 ** controlplane.emagiz.com:443
Erik Bakker 141.1 27 ** controlplane-agent.emagiz.com:443
Bas Elzinga 138.2 28 ** controltower.emagiz.com:443
Erik Bakker 105.1 29 ** controltower.kpn-dsh.com:443
Bas Elzinga 138.2 30 ** controlbus.emagiz.com:443
Erik Bakker 147.1 31 ** {yourcloudslotid}.emagizcloud.com:8443
32
33 * Preferably we suggest to implement the following entries on DNS level.
34 ** *.emagizcloud.com
35 ** *.emagiz.com
36 ** *.kpn-dsh.com{{/info}}
Erik Bakker 99.1 37
etorken 101.1 38 {{warning}}
Erik Bakker 149.1 39 * When **your** requirements force the use of **IP Whitelisting**, the following configuration is needed to communicate with our infrastructure and the specific eMagiz model(s) to which you need to connect. These IP addresses are subject to periodic change on our end.
40
etorken 101.1 41 ** 35.158.46.28:443
42 ** 3.74.190.88:443
43 ** 35.158.46.28:8443
44 ** 3.74.190.88:8443
45 ** 35.158.46.28:8444
Erik Bakker 103.1 46 ** 3.74.190.88:8444
47 ** 3.74.209.20:443
48 ** 3.76.127.155:443
49 ** 3.74.209.20:8443
50 ** 3.76.127.155:8443
51 ** 3.74.209.20:8444
CarlijnKokkeler 134.1 52 ** 3.76.127.155:8444
53 ** 18.199.123.240
54 ** 18.184.211.189
55 ** 3.123.136.31{{/warning}}
Erik Bakker 103.1 56
Erik Bakker 142.1 57
58
Erik Bakker 95.1 59 ===3.2 Installation Windows===
Erik Bakker 142.1 60 When Windows is selected as the operating system, you need Windows Server 2022. Older Windows servers are **not** supported.
eMagiz 1.1 61
Erik Bakker 95.1 62 ==== 3.2.1 Docker Installation ====
Erik Bakker 142.1 63 To install Docker on your machine, execute the following commands in PowerShell with administrative rights:
eMagiz 18.1 64
eMagiz 42.1 65 {{code language="cmd"}}
CarlijnKokkeler 126.1 66 Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Install-update-docker/install-update-docker.ps1" -o install-update-docker-ce.ps1
67 .\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
eMagiz 43.1 68 {{/code}}
eMagiz 44.1 69
Erik Bakker 135.1 70 ==== 3.2.2 Customization ====
CarlijnKokkeler 122.1 71
Erik Bakker 142.1 72 After installing Docker, you can stick with the standard configuration or adjust specific settings. Settings that can be of particular interest include the one that defines the IP address range your Docker installation will use to run containers, and the one that defines where to store data (i.e., containers and images). To check the full list of compatible configuration options for Windows, you can check: [[Configure Docker in Windows>>https://learn.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon||target="blank"]].
Erik Bakker 136.1 73
Erik Bakker 137.1 74 {{warning}}Be aware that the customization will only take effect once you have restarted the machine.{{/warning}}
CarlijnKokkeler 125.1 75
Erik Bakker 135.1 76 ===== 3.2.2.1 IP address range =====
77
Erik Bakker 142.1 78 Below is the code needed to configure a different IP address range.
CarlijnKokkeler 125.1 79
80 {{code language="cmd"}}
Erik Bakker 137.1 81 cd C:\ProgramData\Docker\config\daemon.json
Erik Bakker 142.1 82 #Add the following lines
Erik Bakker 137.1 83 {"fixed-cidr": "<ip-address>"}
Erik Bakker 135.1 84 {{/code}}
Erik Bakker 138.1 85
Erik Bakker 135.1 86 ===== 3.2.2.2 Data location =====
87
Erik Bakker 142.1 88 Below is an example of switching from the default C directory ({{code language="cmd"}}c:\programdata\docker{{/code}}) to the D directory to store Docker data. Based on your internal configuration, you can choose the best suitable variant if needed. To do so, you can add the following attribute to the Docker daemon file:
Erik Bakker 135.1 89
90 {{code language="cmd"}}
Erik Bakker 137.1 91 cd C:\ProgramData\Docker\config\daemon.json
Erik Bakker 142.1 92 #Add the following lines
CarlijnKokkeler 125.1 93 {
94 "data-root": "d:\\docker"
95 }
96 {{/code}}
Erik Bakker 138.1 97
Erik Bakker 142.1 98 {{warning}}Note that when you want to create multiple customizations to your configuration, the result in the daemon.json file should be a **valid** JSON structure{{/warning}}
CarlijnKokkeler 125.1 99
Erik Bakker 135.1 100 ==== 3.2.3 Check installation ====
CarlijnKokkeler 125.1 101
Erik Bakker 95.1 102 After executing the commands above, the server will restart if required. After the restart, execute the following command
eMagiz 44.1 103
eMagiz 45.1 104 {{code language="cmd"}}
Erik Bakker 95.1 105 docker ps
eMagiz 62.1 106 {{/code}}
107
Erik Bakker 142.1 108 If the command returns "command not found," please run the following command again.
eMagiz 72.1 109
110 {{code language="cmd"}}
Erik Bakker 127.1 111 .\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
eMagiz 47.1 112 {{/code}}
eMagiz 24.1 113
Erik Bakker 142.1 114 ==== 3.2.3 Verify Docker functionality ====
eMagiz 45.1 115
Erik Bakker 95.1 116 Execute the following command
eMagiz 50.1 117
eMagiz 49.1 118 {{code language="cmd"}}
Erik Bakker 95.1 119 docker ps
eMagiz 49.1 120 {{/code}}
eMagiz 32.1 121
Erik Bakker 95.1 122 The result of this call should show the following:
eMagiz 51.1 123
Erik Bakker 97.1 124 [[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
eMagiz 52.1 125
Erik Bakker 95.1 126 ==== 3.2.4 Install eMagiz Deploy Agent ====
eMagiz 52.1 127
Erik Bakker 142.1 128 Install the eMagiz Deploy agent as described in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
eMagiz 52.1 129
Erik Bakker 143.1 130 === 3.3 Update Docker ===
Erik Bakker 142.1 131 When you are advised to update your Docker version, you can verify whether you are on the correct Docker version by executing the following command in PowerShell with administrative rights:
CarlijnKokkeler 115.1 132
133 {{code language="cmd"}}
Erik Bakker 142.1 134 docker version
135 {{/code}}
136
Erik Bakker 144.1 137 When this returns a version **lower** than the advised version shown under the "General requirements" section, you can update Docker on your machine. To do so, execute the following command in PowerShell with administrative rights:
Erik Bakker 142.1 138
139 {{code language="cmd"}}
140 .\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
141 {{/code}}
142
Erik Bakker 145.1 143 {{warning}}It may happen that, due to the update, your containers are no longer starting up. To resolve this, please restart the containers, which can be done via a deployment plan or the deploy architecture.{{/warning}}
144
Erik Bakker 142.1 145 ===3.4 Uninstall Docker===
146 To uninstall Docker from your machine, execute the following commands in PowerShell with administrative rights:
147
148 {{code language="cmd"}}
CarlijnKokkeler 115.1 149 Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Uninstall-docker/uninstall-docker.ps1" -o uninstall-docker-ce.ps1
150 {{/code}}
151
152 Example usage:
153
154 {{code language="cmd"}}
155 .\uninstall-docker-ce.ps1
156 {{/code}}
157
Erik Bakker 91.1 158 == 4. Key takeaways ==
eMagiz 1.1 159
Erik Bakker 142.1 160 * eMagiz uses runtime images to deploy the eMagiz runtime on Dockerized environments. The runtime image holds all the information and components required to run the runtime
eMagiz 5.1 161 * eMagiz has a specific agent that manages the download of that image to the on-premises server
Erik Bakker 142.1 162 * The firewall of the on-premises environment should allow outgoing traffic without any restrictions. If that is not desirable, eMagiz can provide the addresses and ports needed to set up the appropriate firewall rules.
eMagiz 1.1 163
Erik Bakker 91.1 164 == 5. Suggested Additional Readings ==
eMagiz 1.1 165
Erik Bakker 133.1 166 * [[Fundamentals (Navigation)>>doc:Main.eMagiz Academy.Fundamentals.WebHome||target="blank"]]
167 ** [[eMagiz Runtime Generation 3 (Explanation)>>doc:Main.eMagiz Academy.Fundamentals.fundamental-runtime-generation3||target="blank"]]
CarlijnKokkeler 129.1 168 * [[Release Information (Menu)>>doc:Main.Release Information.WebHome||target="blank"]]
169 ** [[Environment Templates (Navigation)>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]]
CarlijnKokkeler 128.1 170 * [[Intermediate (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.WebHome||target="blank"]]
171 ** [[eMagiz Runtime Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.WebHome||target="blank"]]
172 *** [[Interpret on-premise logging (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-emagiz-runtime-management-interpret-on-premise-logging.WebHome||target="blank"]]
CarlijnKokkeler 129.1 173 *** [[eMagiz Deploy agent (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
CarlijnKokkeler 128.1 174 * [[Advanced (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.WebHome||target="blank"]]
175 ** [[Lifecycle Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.WebHome||target="blank"]]
176 *** [[Impact of Runtime Image Upgrades (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.advanced-lifecycle-management-impact-of-runtime-image-upgrades.WebHome||target="blank"]]
177 * [[Expert (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.WebHome||target="blank"]]
178 ** [[Solution Architecture (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.WebHome||target="blank"]]
179 *** [[Install Docker for Linux (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-onpremises-server-linux-installguide.WebHome||target="blank"]]
CarlijnKokkeler 131.1 180 * [[Install Docker (Search Result)>>url:https://docs.emagiz.com/bin/view/Main/Search?sort=score&sortOrder=desc&highlight=true&facet=true&r=1&f_space_facet=0%2FMain.&f_type=DOCUMENT&f_locale=en&f_locale=&f_locale=en&text=install+docker||target="blank"]]
CarlijnKokkeler 129.1 181 * Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
CarlijnKokkeler 131.1 182
eMagiz 1.1 183 )))((({{toc/}}))){{/container}}{{/container}}