Skip to Content

Changes for page SMB Connectivity

Last modified by Danniar Firdausy on 2024/09/18 20:40
From version 27.1
edited by Bouke Reitsma
on 2024/05/23 12:04
Change comment: There is no comment for this version
To version 20.1
edited by Bouke Reitsma
on 2024/05/13 13:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,6 +1,5 @@
1 -{{container}}
2 -{{container layoutStyle="columns"}}(((
3 -In some situations, direct communication with a local file directory is not possible, or in other case, an external party requires the files to be placed elsewhere. Typically, these files need to be retrieved from or uploaded to a server location using the FTP or SFTP protocols. However, there is a third communication protocol that can be used for file transfer. In this microlearning we will take a look at Server Message Block (SMB) connectivity within eMagiz.
1 +{{container}}{{container layoutStyle="columns"}}(((
2 +In some cases, there is no communication possible with a local file directory. Or there is a requirement from the external party to place the files somewhere else. Mainly the somewhere else is either an FTP or an SFTP. However, there is a third communication protocol that can be used for file transfer. In this microlearning we will take a look at Server Message Block (SMB) connectivity within eMagiz.
4 4  
5 5  Should you have any questions, please get in touch with [[academy@emagiz.com>>mailto:academy@emagiz.com]].
6 6  
... ... @@ -63,14 +63,14 @@
63 63  * Share and directory
64 64  
65 65  {{info}}
66 -The value for the share and directory field is the main folder for your file share. If the main folder is the exchange folder, then within the SMB inbound channel adapter, a / is needed as remote directory.
65 +The value for the share and directory field is the main folder for your file share. If the main folder is the exchange folder, then within smb inbound channel adapter, a / is needed as remote directory.
67 67  {{/info}}
68 68  
69 69  [[image:Main.Images.Microlearning.WebHome@intermediate-file-based-connectivity-smb-connectivity-smb-session-factory-filled-in.png]]
70 70  
71 -In the advanced tab there are only two settings to change. The minimum and maximum SMB protocol version. By default, these are set to 2.02 and 3.1.1 respectively to allow a wide range of save protocol version. However, if you want to only allow the best performing version, the minimum 3.0.2 is advised. If you aim for the best secured connection version 3.1.1 has the most functionality in this area. The best practise on this is set the minimum version as high as possible to mimize risks.
70 +The settings on the Advanced tab don't have to be changed in most cases. If your specific setup does require a change to these settings, please consult the help texts on the component level for advice.
72 72  
73 -Now that we have configured the support object,we can add the SMB inbound channel adapter to the flow.
72 +Now that we have configured the support object adding the SMB inbound channel adapter to the flow has become time.
74 74  
75 75  [[image:Main.Images.Microlearning.WebHome@intermediate-file-based-connectivity-smb-connectivity-smb-inbound-channel-adapter-empty.png]]
76 76  
... ... @@ -82,12 +82,12 @@
82 82  
83 83  === 3.2 SMB Gateway ===
84 84  
85 -The SMB Gateway is an additional component that can be used to interact with your SMB share. t allows the use of a set of pre-configured commands to perform actions such as deleting files. Compared to the outbound channel adapter replies are send back to eMagiz. These reply messages depend on the selected command. Every command option is explained in detail within the helptext. An example configuration to send files is shown below.
84 +The SMB Gateway is an additional component that can be used to interact with your SMB share. It enables the use of a set of pre-configured commands to for example delete files. The reply messages depend on the selected command. Every command option is explained within the helptext. An example configuration to send files is shown below.
86 86  
87 87  [[image:Main.Images.Microlearning.WebHome@intermediate-file-based-connectivity-smb-connectivity-smb-outbound-gateway-filled-in.png]]
88 88  
89 89  {{info}}
90 -Please note that for some commands an SpEL expression is required to respresent a path. This setting can be found in the advanced settings. An example for the mget command could be **myfilesdirectory/** to get only files from this directory.
89 +Please note that for some commands an SpEL expression is required to respresent a path. This setting can be found in the advanced settings. An example for the mget command could be *.txt to get only text files from the directory.
91 91  {{/info}}
92 92  
93 93  All available options are:
... ... @@ -117,5 +117,4 @@
117 117  * [[SMB Support>>https://docs.spring.io/spring-integration/reference/smb.html||target="blank"]]
118 118  * [[SMB Overview>>https://learn.microsoft.com/en-us/windows-server/storage/file-server/file-server-smb-overview||target="blank"]]
119 119  
120 -)))((({{toc/}}))){{/container}}
121 -{{/container}}
119 +)))((({{toc/}}))){{/container}}{{/container}}