Skip to Content
Last modified by Danniar Firdausy on 2024/09/18 13:49
From version 13.5
edited by Danniar Firdausy
on 2024/09/05 12:22
Change comment: There is no comment for this version
To version 8.1
edited by Erik Bakker
on 2022/08/30 09:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.dfirdausy
1 +XWiki.ebakker
Content
... ... @@ -8,52 +8,53 @@
8 8  
9 9  == 2. Key concepts ==
10 10  
11 -This microlearning is about cleaning up the Alerting as configured in the Manage phase. Alerts can be set on various ways and levels. During the cleanup of various systems, flows and runtime, the Alerting needs to remain current with the integration model.
11 +This microlearning is about cleaning up the Alerting as configured in the Manage phase. Alerts can be set on various ways and levels * please inspect the related microlearnings around alerting to understand more about that. During the cleanup of various systems, flows and runtime, the Alerting needs to remain current with the integration model.
12 12  
13 -{{info}}Please inspect the related microlearnings around [[alerting in eMagiz>>doc:Main.eMagiz Academy.Microlearnings.Crash Course.Crash Course Platform.crashcourse-platform-manage-alerting-gen3||target="blank"]] to understand more about that topic.{{/info}}
14 -
15 15  == 3. Cleanup the Alerting in Manage ==
16 16  
17 17  === 3.1 Scenario's when to cleanup the Alerting phase ===
18 18  
19 -* A user is no longer active on the integration model.
20 - ** The user may still be referenced in the notification settings and should be removed
17 +* A user is no longer active on the integration model. The use may still be referenced in the notification settings and should be removed
21 21  * A specific runtime is removed from the integration model that is referenced in the Alerting
22 22  * A flow or integration is removed from the integration model that is reference in the Alerting
23 23  
24 24  === 3.1 Steps to clean ===
25 25  
26 -Once you have opened your model you should navigate to the Manage environment. From here you should open the Alerting section under Manage and select Triggers. Here you can change the relevant triggers.
23 +Navigate to the Triggers first.
27 27  
28 -**Queue specific**
25 +* Locate Queue specific
26 + If you have configured the alerting following the best practice outlined in the user guide for Alerting, the following triggers (at least!!!) need to be changed. For your specific situation more triggers could be relevant
29 29  
30 -If you have configured the alerting following the best practice outlined in the user guide for Alerting, the following triggers (at least!!!) need to be changed. For your specific situation more triggers could be relevant
28 + ** Standard – Queue consumers too high
29 + ** Standard – Queue consumers too low
31 31  
32 -* Standard – Queue consumers too high
33 -* Standard – Queue consumers too low
31 +* Locate Runtime specific
32 + If you are removing the last flow belonging to a system and you have followed the best practice outlined here the following triggers (at least!!!) need to be changed. For your specific situation more triggers could be relevant
34 34  
35 -**Runtime specific**
34 + ** Standard – Data measurements missing
35 + ** Standard – Log entries missing
36 + ** Standard – Error log entry
36 36  
37 -If you are removing the last flow belonging to a system and you have followed the best practice outlined here the following triggers (at least!!!) need to be changed. For your specific situation more triggers could be relevant
38 -
39 -* Standard – Data measurements missing
40 -* Standard – Log entries missing
41 -* Standard – Error log entry
42 -
43 43  * Once you have located the candidates, update and/or remove the triggers relevant for update
44 44  * Review if you need to remove a notification setting in case a trigger is removed. If yes, remove it.
45 45  * Review if you need to remove a tag in case the tag is not used in any trigger. If yes, remove it.
46 46  
47 -== 4. Key takeaways ==
42 +== 4. Assignment ==
48 48  
44 +Determine whether you can clean up parts of the Alerts from the project that you work on. If so, execute the cleanup.
45 +This assignment can be completed with the help of the (Academy) project that you have created/used in the previous assignment.
46 +
47 +== 5. Key takeaways ==
48 +
49 49  * Cleaning up the Alert phase is important to ensure no false positive alerts are created/used
50 50  * Review the Alert setting at each release to production (post deployment step) to keep things manageable
51 51  
52 -== 5. Suggested Additional Readings ==
52 +== 6. Suggested Additional Readings ==
53 53  
54 -* [[Crash Courses (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Crash Course.WebHome||target="blank"]]
55 -** [[Crash Course Platform (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Crash Course.Crash Course Platform.WebHome||target="blank"]]
56 -*** [[Standard Alerting eMagiz (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Crash Course.Crash Course Platform.crashcourse-platform-manage-alerting-gen3||target="blank"]]
54 +None
57 57  
56 +== 7. Silent demonstration video ==
58 58  
58 +None
59 +
59 59  )))((({{toc/}}))){{/container}}{{/container}}