Changes for page Install Docker for Linux

Last modified by Erik Bakker on 2026/01/30 10:56

From 86.1 to 87.1 From 134.1 to 135.1

From version 87.1

edited by eMagiz
on 2023/04/11 15:47

Change comment: There is no comment for this version

To version 134.1

edited by Erik Bakker
on 2026/01/23 12:52

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--Pre-requisite installation of on-premises server
++Install Docker for Linux

Author

@@ -1,1 +1,1 @@
--XWiki.eMagiz
++XWiki.ebakker

Content

@@ -1,5 +1,5 @@
  {{container}}{{container layoutStyle="columns"}}(((
--In this microlearning, we will focus on how an on-premises server can be prepared for a eMagiz Deploy agent installation.
++In eMagiz's current runtime architecture, Docker technology plays a central role in deploying runtimes. eMagiz creates specific runtime images tailored for dockerized environments, streamlining deployment. This section focuses on preparing a Linux server for the installation of the eMagiz Deploy Agent, which facilitates downloading these runtime images from the eMagiz infrastructure.
  Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
@@ -9,98 +9,100 @@
  * Good understanding of eMagiz runtimes in general
  == 2. Key concepts ==
--In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
++In the current runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
--In the below section the Windows and Linux variants are described in terms of how to prepare the server to allow the eMagiz Deploy agent to be installed. That agent allows to download images from the eMagiz infrastructure.
++In the below section the Linux variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
  == 3. On-premises deployments ==
  ===3.1 General requirements===
  These are the general requirements to allow the installation of the eMagiz Docker agent:
--* Ensure access to the following URLs is enabled
--    ** registry.emagiz.com:8443
--    ** controlplane.emagiz.com:8000
--    ** Preferably the entry should be *.emagiz.com
--===3.2 Installation requirements Linux===
--Whenever Linux is selected as operating system, the latest version of Ubuntu will work. Other Linux distributions will also work such as Debian or Red Hat.
--**Step 1: Install linux distribution**
--Follow all steps in section 3.4
++{{info}}It is advised to use Docker version 24.0.7 as this is the version being used in the latest eMagiz cloud template. We advise to align the on-premise Docker version and update it according to the release notes of the [[Cloud templates>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]].
++{{/info}}
--**Step 2: Install eMagiz Deploy Agent**
--Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
++{{info}}
++* Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
++    ** registry.emagiz.com:443
++    ** controlplane.emagiz.com:443
++    ** controlplane-agent.emagiz.com:443
++    ** controltower.emagiz.com:443
++    ** controltower.kpn-dsh.com:443
++    ** controlbus.emagiz.com:443
++    ** Preferably the entry should be *.emagiz.com
++    ** Preferably the entry should be *.kpn-dsh.com{{/info}}
--===3.3 Installation requirements Windows Server 2022 ===
++{{warning}}
++* When using **IP Whitelisting**, the following configuration is needed to communicate to your JMS.
++    ** 35.158.46.28:443
++    ** 3.74.190.88:443
++    ** 35.158.46.28:8443
++    ** 3.74.190.88:8443
++    ** 35.158.46.28:8444
++    ** 3.74.190.88:8444
++    ** 3.74.209.20:443
++    ** 3.76.127.155:443
++    ** 3.74.209.20:8443
++    ** 3.76.127.155:8443
++    ** 3.74.209.20:8444
++    ** 3.76.127.155:8444
++    ** 18.199.123.240
++    ** 18.184.211.189
++    ** 3.123.136.31{{/warning}}
--{{info}}Please note that this section also applies to Windows Server 2019 version >1806{{/info}}
++===3.2 Installation Linux===
++Whenever Linux is selected as operating system, the latest version of Ubuntu will work. Other Linux distributions will also work such as Debian or Red Hat.
--The steps below will install a linux subsystem under Windows. In that Linux system, Docker and Java will be installed. Please note that the Windows server needs to be able to run Virtualized (either via BIOS setting or via Nested Virtualization).
++==== 3.2.1 Set up Docker's apt repository ====
--**Step 1: Install linux distribution**
--
  {{code language="cmd"}}
--  wsl --install -d Ubuntu
--  sudo apt-get update
--  sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
--  . /etc/os-release
++# Add Docker's official GPG key:
++sudo apt-get update
++sudo apt-get install ca-certificates curl
++sudo install -m 0755 -d /etc/apt/keyrings
++sudo curl -fsSL https://download.docker.com/linux/ubuntu/gpg -o /etc/apt/keyrings/docker.asc
++sudo chmod a+r /etc/apt/keyrings/docker.asc
++
++# Add the repository to Apt sources:
++echo \
++  "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/ubuntu \
++  $(. /etc/os-release && echo "$VERSION_CODENAME") stable" | \
++  sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
++sudo apt-get update
  {{/code}}
--**Step 2: Configure linux system**
--Please see section 3.4 for these these steps
--
--**Step 3: Update wsl config file **
--In this step we need to add or update the WSL config file that manages the resources of the Linux subsystem. Important resources to manage are the assigned memory and number of processors. For memory we recommend to review the mempory settings for the runtime that need to run on this server and add 762 MB to the total value of the heap and non-heap of these runtimes. For processor we recommend to set the value to 2 - depending on the amount of processors available on that machine
++==== 3.2.2 Install Docker ====
--First, locate the config file or add it to the location %USERPROFILE%. The name should be .wslconfig (no extension)
--
  {{code language="cmd"}}
--  #Add following lines
--
--  # Settings apply across all Linux distros running on WSL 2
--  [wsl2]
--  # Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
--  memory=16GB
--  # Sets the VM to use two virtual processors
--  processors=2
++sudo apt-get install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
  {{/code}}
--
--**Step 4: Auto start the linux subsystem when Windows server restarts **
++==== 3.2.3 Customization ====
--{{code language="cmd"}}
--* Press Windows+R
--* Type shell:startup and press enter
--* Add or update file start_wsl.bat
--* Add following line into the document and save file
--  * wsl sudo /usr/bin/dockerd
--  {{/code}}
++After installing Docker you have the option to stick with the standard configuration of Docker or you can opt to alter some specific settings. One setting that can be of particular interest is the setting that defines the IP address range your Docker installation will use to run the containers.
--**Step 5: Install eMagiz Deploy Agent**
--Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]].
++===== 3.2.3.1 IP address range =====
--
--===3.4 Installation steps to configure Linux subsystem ===
++Below you can find the recommended values depending on the range which can be filled in the value <ip-address> below:
++* 10.0.0.1/8
++** advised value 10.25.0.1/16
++* 172.16.0.1/12
++** advised value 172.16.0.1/16
++* 192.168.0.1/16
++** advised value 192.168.0.1/16
--**Step 1: Install Docker **
--
  {{code language="cmd"}}
--  curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
--  echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
--  sudo apt update
--  sudo apt install docker-ce docker-ce-cli containerd.io
++sudo nano /etc/docker/daemon.json
++#Add following lines
++{"bip": "<ip-address>"}
  {{/code}}
--{{info}}
-- Requires ~335 Mb space to install
--{{/info}}
++{{warning}}Be aware that the customization will only take effect once you have restarted Docker.{{/warning}}
--**Step 2: Install Java **
++==== 3.2.4 Verify succesfull installation of the Docker Engine ====
  {{code language="cmd"}}
--  wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
--  echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
--  sudo apt update # update if you haven't already
--  sudo apt install temurin-8-jdk
++sudo docker run hello-world
  {{/code}}
  {{info}}
@@ -107,125 +107,60 @@
   Requires ~335 Mb space to install
  {{/info}}
--**Step 3: Ensure Docker is autostarted with WSL **
++==== 3.2.5 Install eMagiz Deploy Agent ====
--{{info}}
--This remark is valid for Windows based installations only
--{{/info}}
++Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
--{{code language="cmd"}}
--nano .bashrc
++=== 3.3 Update Docker ===
++When you are advised to update your Docker version, you can verify whether you are on the correct Docker version by executing the following command in PowerShell with administrative rights:
--  #Add following lines to bashrc
--	DOCKER_DISTRO="Ubuntu"
--	DOCKER_LOG_DIR=$HOME/docker_logs
--	mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
--	/mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
++{{code language="cmd"}}
++docker version
  {{/code}}
--**Step 4: Add user to Docker group **
++When this returns a version **lower** than the advised version shown under the "General requirements" section, you can update Docker on your machine. To do so, execute the following command in PowerShell with administrative rights:
  {{code language="cmd"}}
--sudo visudo
--
--  #Add following lines
--
--  # Don't ask for password
--  %docker ALL=(ALL)  NOPASSWD: /usr/bin/dockerd
++.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
  {{/code}}
--**Step 5: Ensure safe IP range for WSL **
++===3.4 Uninstall Docker===
++To uninstall Docker from your machine, execute the following commands in PowerShell with administrative rights:
--{{info}}
--This remark is valid for Windows based installations only
--{{/info}}
--
--This step ensures that the IP address range of the machine doesn't conflict with any IP address of the Linux subsystem. Below the recommended values depending on the range which can be filled in the value <ip-address> below:
--* 10.0.0.1/8
--  ** advised value 10.25.0.1/16
--* 172.16.0.1/12
--  ** advised value 172.16.0.1/16
--* 192.168.0.1/16
--  ** advised value 10.25.0.1/16
--
  {{code language="cmd"}}
--sudo nano /etc/docker/daemon.json
++Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Uninstall-docker/uninstall-docker.ps1" -o uninstall-docker-ce.ps1
++{{/code}}
--  #Add following lines
++Example usage:
--  {"bip": "<ip-address>"}
++{{code language="cmd"}}
++.\uninstall-docker-ce.ps1
  {{/code}}
++== 4. Key takeaways ==
--
--===3.5 Installation requirements Windows Server 2019 version 1806===
--
--{{warning}}Please note that this section is under construction. Please contact us at productmanagement@emagiz.com{{/warning}}
--
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Enable Hyper-V in Windows Server
--  ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
--  ** Restart windows
--* Cross check is WSL 2.0 is installed
--  ** Use this command to get WSL 2.0: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
--* Please follow the instructions for preparing a Windows 2022 installation in section 3.3
--
--{{info}}
--  * Install Docker Desktop on the Windows Server
--  ** Please refer to this link: https://www.docker.com/products/docker-desktop/
--  ** Restart windows
--* Update Docker Desktop configuration
--  ** Go to settings, and enable ‘Expose daemon on tcp://localhost:2375’ without TLS
--  ** Restart Docker
--* Open Powershell as Administrator
--  ** Execute "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
--  ** Execute Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
--  ** Execute curl.exe -L -o ubuntu-2004.appx https://aka.ms/wslubuntu2004
--  ** Execute Add-AppxPackage .\ubuntu-2004.appx
--    *** If errors occur, please consult https://learn.microsoft.com/en-us/windows/wsl/install-on-server. Rename the file to a zip, expand it, and add it to the path variable.
--* Ubuntu should now be a runnable program (press windows key, type ubuntu)
--* Open the ubuntu terminal, and finish the installation.
--  ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
--* Go to the next section around installing the eMagiz Docker agent
--{{/info}}
--
--===3.6 Installation requirements Windows Server 2012 R2 ===
--
--{{warning}}Please note that this section is under construction. Please contact us at productmanagement@emagiz.com{{/warning}}
--
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install & enable Hyper-V in Windows Server
--  ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
--  ** Restart windows
--* Download a ubuntu server 18.04 (https://releases.ubuntu.com/18.04/ubuntu-18.04.6-live-server-amd64.iso )
--* Create a VM in HyperV.
--  ** For this, choose Generation 1, the amount of memory you want to assign to ubuntu and thus to the containers. Please consider the overhead for memory as well (such as OS).
--  ** Configure a virtual switch.
--  ** Add a virtual Hard Disk with proper sizing (e.g. 30 GB)
--  ** Install an operating system from bootable CD/DVD, ISO file
--* Install ubuntu downloaded previously on the VM
--* Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
--* Go to the next section around installing the eMagiz agent
--
--== 4. Assignment ==
--
--Check out the cheatcheet for Docker command line:
--
--[[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
--
--== 5. Key takeaways ==
--
  * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
  * eMagiz has a specific agent that manages the download of that image to the on-premises server
  * The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
++== 5. Suggested Additional Readings ==
++* [[Docker official installation guide (External)>>https://docs.docker.com/engine/install/ubuntu/||target="blank"]]
++** [[Fundamentals (Navigation)>>doc:Main.eMagiz Academy.Fundamentals.WebHome||target="blank"]]
++*** [[eMagiz Runtime Generation 3 (Explanation)>>doc:Main.eMagiz Academy.Fundamentals.fundamental-runtime-generation3||target="blank"]]
++* [[Release Information (Menu)>>doc:Main.Release Information.WebHome||target="blank"]]
++** [[Environment Templates (Navigation)>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]]
++* [[Intermediate (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.WebHome||target="blank"]]
++** [[eMagiz Runtime Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.WebHome||target="blank"]]
++*** [[Interpret on-premise logging (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-emagiz-runtime-management-interpret-on-premise-logging.WebHome||target="blank"]]
++*** [[eMagiz Deploy agent (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
++* [[Advanced (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.WebHome||target="blank"]]
++** [[Lifecycle Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.WebHome||target="blank"]]
++*** [[Impact of Runtime Image Upgrades (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.advanced-lifecycle-management-impact-of-runtime-image-upgrades.WebHome||target="blank"]]
++* [[Expert (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.WebHome||target="blank"]]
++** [[Solution Architecture (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.WebHome||target="blank"]]
++*** [[Install Docker for Windows (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-onpremises-server-windows-installguide.WebHome||target="blank"]]
++* [[Install Docker (Search Result)>>url:https://docs.emagiz.com/bin/view/Main/Search?sort=score&sortOrder=desc&highlight=true&facet=true&r=1&f_space_facet=0%2FMain.&f_type=DOCUMENT&f_locale=en&f_locale=&f_locale=en&text=install+docker||target="blank"]]
++* Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
--== 6. Suggested Additional Readings ==
--N/A
--
--== 7. Silent demonstration video ==
--
--N/A
--
  )))((({{toc/}}))){{/container}}{{/container}}