Skip to Content
Last modified by Bas Elzinga on 2024/12/17 12:20
From version 94.1
edited by Erik Bakker
on 2024/02/08 16:43
Change comment: There is no comment for this version
To version 95.1
edited by Erik Bakker
on 2024/02/08 17:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -10,9 +10,9 @@
10 10  
11 11  == 2. Key concepts ==
12 12  In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
13 -
14 -In the below section the Windows and Linux variants are described in terms of how to prepare the server to allow the eMagiz Deploy agent to be installed. That agent allows to download images from the eMagiz infrastructure.
15 -
13 +
14 +In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
15 +
16 16  == 3. On-premises deployments ==
17 17  
18 18  ===3.1 General requirements===
... ... @@ -22,175 +22,48 @@
22 22   ** controlplane.emagiz.com:8000
23 23   ** Preferably the entry should be *.emagiz.com
24 24  
25 -===3.2 Installation requirements Linux===
26 -Whenever Linux is selected as operating system, the latest version of Ubuntu will work. Other Linux distributions will also work such as Debian or Red Hat.
27 -**Step 1: Install linux distribution**
28 -Follow the relevant steps in section 3.4
25 +===3.2 Installation Windows===
26 +Whenever Windows is selected as operating system, you need to have a Windows Server 2022 version or a 2019 version (> 1806). Older Windows servers are **not** supported.
29 29  
30 -**Step 2: Install eMagiz Deploy Agent**
31 -Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
32 32  
33 -===3.3 Installation requirements Windows Server 2022 ===
29 +==== 3.2.1 Docker Installation ====
30 +In powershell with administrative rights, execute the following commands
34 34  
35 -{{info}}Please note that this section also applies to Windows Server 2019 version >1806{{/info}}
36 -
37 -The steps below will install a linux subsystem under Windows. In that Linux system, Docker and Java will be installed. Please note that the Windows server needs to be able to run Virtualized (either via BIOS setting or via Nested Virtualization).
38 -
39 -**Step 1: Install linux distribution**
40 -
41 41  {{code language="cmd"}}
42 - wsl --install -d Ubuntu
43 - sudo apt-get update
44 - sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
45 - . /etc/os-release
33 +Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/microsoft/Windows-Containers/Main/helpful_tools/Install-DockerCE/install-docker-ce.ps1" -o install-docker-ce.ps1
34 +.\install-docker-ce.ps1
46 46  {{/code}}
47 47  
48 -**Step 2: Configure linux system**
49 -Please see section 3.4 for these these steps
37 +==== 3.2.2 Check installation ====
50 50  
51 -**Step 3: Update wsl config file **
52 -In this step we need to add or update the WSL config file that manages the resources of the Linux subsystem. Important resources to manage are the assigned memory and number of processors. For memory we recommend to review the mempory settings for the runtime that need to run on this server and add 762 MB to the total value of the heap and non-heap of these runtimes. For processor we recommend to set the value to 2 - depending on the amount of processors available on that machine
39 +After executing the commands above, the server will restart if required. After the restart, execute the following command
53 53  
54 -First, locate the config file or add it to the location %USERPROFILE%. The name should be .wslconfig (no extension)
55 -
56 56  {{code language="cmd"}}
57 - #Add following lines
58 -
59 - # Settings apply across all Linux distros running on WSL 2
60 - [wsl2]
61 - # Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
62 - memory=16GB
63 - # Sets the VM to use two virtual processors
64 - processors=2
42 +docker ps
65 65  {{/code}}
66 66  
67 -**Step 4: Auto start the linux subsystem when Windows server restarts **
45 +If the command returns that the command cannot be found, please run the following command again.
68 68  
69 69  {{code language="cmd"}}
70 -* Press Windows+R
71 -* Type shell:startup and press enter
72 -* Add or update file start_wsl.bat
73 -* Add following line into the document and save file
74 - * wsl sudo /usr/bin/dockerd
75 - {{/code}}
76 -
77 -**Step 5: Install eMagiz Deploy Agent**
78 -Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]].
79 -
80 -===3.4 Installation steps to configure Linux subsystem ===
81 -
82 -**Step 1: Install Docker **
83 -
84 -{{code language="cmd"}}
85 - curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
86 - echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
87 - sudo apt update
88 - sudo apt install docker-ce docker-ce-cli containerd.io
48 +.\install-docker-ce.ps1
89 89  {{/code}}
90 90  
91 -{{info}}
92 - Requires ~335 Mb space to install
93 -{{/info}}
51 +==== 3.2.3 Verify docker functionality ====
94 94  
95 -**Step 3: Ensure Docker is autostarted with WSL **
53 +Execute the following command
96 96  
97 -{{info}}
98 -This remark is valid for Windows based installations only
99 -{{/info}}
100 -
101 101  {{code language="cmd"}}
102 -nano .bashrc
103 -
104 - #Add following lines to bashrc
105 - DOCKER_DISTRO="Ubuntu"
106 - DOCKER_LOG_DIR=$HOME/docker_logs
107 - mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
108 - /mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
56 +docker ps
109 109  {{/code}}
110 110  
111 -**Step 4: Add user to Docker group **
59 +The result of this call should show the following:
112 112  
113 -{{code language="cmd"}}
114 -sudo visudo
61 +[[image:Main.Images.Microlearnings.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
115 115  
116 - #Add following lines
63 +==== 3.2.4 Install eMagiz Deploy Agent ====
117 117  
118 - # Don't ask for password
119 - %docker ALL=(ALL) NOPASSWD: /usr/bin/dockerd
120 -{{/code}}
65 +Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
121 121  
122 -**Step 5: Ensure safe IP range for WSL **
123 -
124 -{{info}}
125 -This remark is valid for Windows based installations only
126 -{{/info}}
127 -
128 -This step ensures that the IP address range of the machine doesn't conflict with any IP address of the Linux subsystem. Below the recommended values depending on the range which can be filled in the value <ip-address> below:
129 -* 10.0.0.1/8
130 - ** advised value 10.25.0.1/16
131 -* 172.16.0.1/12
132 - ** advised value 172.16.0.1/16
133 -* 192.168.0.1/16
134 - ** advised value 192.168.0.1/16
135 -
136 -{{code language="cmd"}}
137 -sudo nano /etc/docker/daemon.json
138 -
139 - #Add following lines
140 -
141 - {"bip": "<ip-address>"}
142 -{{/code}}
143 -
144 -
145 -===3.5 Installation requirements Windows Server 2019 version 1806===
146 -
147 -{{warning}}Please note that this section is under construction. Please contact us at productmanagement@emagiz.com{{/warning}}
148 -
149 -These are the requirements to allow the installation of the eMagiz Docker agent:
150 -* Enable Hyper-V in Windows Server
151 - ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
152 - ** Restart windows
153 -* Cross check is WSL 2.0 is installed
154 - ** Use this command to get WSL 2.0: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
155 -* Please follow the instructions for preparing a Windows 2022 installation in section 3.3
156 -
157 -{{info}}
158 - * Install Docker Desktop on the Windows Server
159 - ** Please refer to this link: https://www.docker.com/products/docker-desktop/
160 - ** Restart windows
161 -* Update Docker Desktop configuration
162 - ** Go to settings, and enable ‘Expose daemon on tcp://localhost:2375’ without TLS
163 - ** Restart Docker
164 -* Open Powershell as Administrator
165 - ** Execute "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
166 - ** Execute Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
167 - ** Execute curl.exe -L -o ubuntu-2004.appx https://aka.ms/wslubuntu2004
168 - ** Execute Add-AppxPackage .\ubuntu-2004.appx
169 - *** If errors occur, please consult https://learn.microsoft.com/en-us/windows/wsl/install-on-server. Rename the file to a zip, expand it, and add it to the path variable.
170 -* Ubuntu should now be a runnable program (press windows key, type ubuntu)
171 -* Open the ubuntu terminal, and finish the installation.
172 - ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
173 -* Go to the next section around installing the eMagiz Docker agent
174 -{{/info}}
175 -
176 -===3.6 Installation requirements Windows Server 2012 R2 ===
177 -
178 -{{warning}}Please note that this section is under construction. Please contact us at productmanagement@emagiz.com{{/warning}}
179 -
180 -These are the requirements to allow the installation of the eMagiz Docker agent:
181 -* Install & enable Hyper-V in Windows Server
182 - ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
183 - ** Restart windows
184 -* Download a ubuntu server 18.04 (https://releases.ubuntu.com/18.04/ubuntu-18.04.6-live-server-amd64.iso )
185 -* Create a VM in HyperV.
186 - ** For this, choose Generation 1, the amount of memory you want to assign to ubuntu and thus to the containers. Please consider the overhead for memory as well (such as OS).
187 - ** Configure a virtual switch.
188 - ** Add a virtual Hard Disk with proper sizing (e.g. 30 GB)
189 - ** Install an operating system from bootable CD/DVD, ISO file
190 -* Install ubuntu downloaded previously on the VM
191 -* Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
192 -* Go to the next section around installing the eMagiz agent
193 -
194 194  == 4. Key takeaways ==
195 195  
196 196  * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime